DELTA, OH —
OSHA Inspection: RADEMACHER INDUSTRIAL
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of RADEMACHER INDUSTRIAL in 7800 ST. RT. 109, DELTA, OH 43515 (NAICS 238110). OSHA activity number 311604169.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RADEMACHER INDUSTRIAL
- Site address
- 7800 ST. RT. 109
- City
- DELTA
- State
- OH
- ZIP
- 43515
- Mailing
- 940 MARTIN LUTHER KING JR BLVD, FARRELL, PA 16121
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238110
- SIC code (legacy)
- 1771
- Employees
- 5
- Ownership type
- A
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 29, 2008
- Abate by
- Nov 17, 2008
- Penalty
- Initial $3,000 · Current $1,200 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees. (a)Rademacher Industrial System, Inc., site address: 7800 St. Rt. 109, Delta, OH: On or about June 25, 2008, employees were exposed to pinch point hazards while riding the bucket of the John Deere 200C excavator to the bottom of the excavation. The bucket was a specially designed, clam-shell bucket that was hydraulically powered and operated by the controls in the cab of the excavator. One method of abatement would be to follow the safe operating procedures set forth in the Association of Equipment Manufacturers (AEM) safety manual for Hydraulic Excavators (HE-60-1), which states on page 20 -"Never use a bucket for a work platform or personnel carrier." In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1200.00
- — Z (S) $3000.00
1926.20 B01
- Issued
- Sep 29, 2008
- Abate by
- Nov 17, 2008
- Penalty
- Initial $3,000 · Current $1,200 Reduced
Recent events (2)
- — I (S) $1200.00
- — Z (S) $3000.00
1926.21 B02
- Issued
- Sep 29, 2008
- Abate by
- Oct 24, 2008
- Penalty
- Initial $3,000 · Current $1,200 Reduced
Recent events (2)
- — I (S) $1200.00
- — Z (S) $3000.00
1926.503 A01
- Issued
- Sep 29, 2008
- Abate by
- Nov 17, 2008
Recent events (2)
- — I (S)
- — Z (S)
1926.21 B06 I
- Issued
- Sep 29, 2008
- Abate by
- Oct 24, 2008
- Penalty
- Initial $3,000 · Current $1,200 Reduced
Recent events (2)
- — I (S) $1200.00
- — Z (S) $3000.00
1926.501 B07 II
- Issued
- Sep 29, 2008
- Abate by
- Oct 2, 2008
- Penalty
- Initial $4,200 · Current $1,680 Reduced
Recent events (2)
- — I (S) $1680.00
- — Z (S) $4200.00
1926.651 G01 I
- Issued
- Sep 29, 2008
- Abate by
- Oct 24, 2008
- Penalty
- Initial $3,000 · Current $1,200 Reduced
Recent events (2)
- — I (S) $1200.00
- — Z (S) $3000.00
1926.651 G01 II
- Issued
- Sep 29, 2008
- Abate by
- Oct 24, 2008
Recent events (2)
- — I (S)
- — Z (S)
1926.651 G02 I
- Issued
- Sep 29, 2008
- Abate by
- Oct 24, 2008
- Penalty
- Initial $4,200 · Current $1,680 Reduced
Recent events (2)
- — I (S) $1680.00
- — Z (S) $4200.00
1926.651 K02
- Issued
- Sep 29, 2008
- Abate by
- Oct 2, 2008
- Penalty
- Initial $4,200 · Current $1,680 Reduced
Recent events (2)
- — I (S) $1680.00
- — Z (S) $4200.00
1926.652 A01
- Issued
- Sep 29, 2008
- Abate by
- Oct 2, 2008
Recent events (2)
- — I (S)
- — Z (S)
1926.652 G02
- Issued
- Sep 29, 2008
- Abate by
- Oct 2, 2008
- Penalty
- Initial $3,000 · Current $1,200 Reduced
Recent events (2)
- — I (S) $1200.00
- — Z (S) $3000.00
1926.701 B
- Issued
- Sep 29, 2008
- Abate by
- Oct 2, 2008
- Penalty
- Initial $4,200 · Current $1,680 Reduced
Recent events (2)
- — I (S) $1680.00
- — Z (S) $4200.00
1926.1051 B
- Issued
- Sep 29, 2008
- Abate by
- Oct 2, 2008
- Penalty
- Initial $3,000 · Current $1,200 Reduced
Recent events (2)
- — I (S) $1200.00
- — Z (S) $3000.00
1926.1053 A19
- Issued
- Sep 29, 2008
- Abate by
- Oct 2, 2008
Recent events (2)
- — I (S)
- — Z (S)
1926.1053 A13
- Issued
- Sep 29, 2008
- Abate by
- Oct 24, 2008
- Penalty
- Initial $1,500 · Current $600 Reduced
Recent events (2)
- — I (S) $600.00
- — Z (S) $1500.00
1926.501 B01
- Issued
- Sep 29, 2008
- Abate by
- Oct 2, 2008
- Penalty
- Initial $35,000 · Current $14,000 Reduced
Recent events (2)
- — I (W) $14000.00
- — Z (W) $35000.00
1926.350 H
- Issued
- Sep 29, 2008
- Abate by
- Oct 24, 2008
Recent events (2)
- — I (O)
- — Z (O)
More inspections in this industry (NAICS 238110)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311604169.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.