Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TRADEWINDS CONSTRUCTION

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of TRADEWINDS CONSTRUCTION in 50 SOUTH STEPHANIE, HENDERSON, NV 89012 (NAICS 238130). OSHA activity number 311637953.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Tradewinds Construction — free Get an email when a new federal OSHA severe-injury report for Tradewinds Construction is published. One employer, no account, unsubscribe in one click.
Site address
50 SOUTH STEPHANIE
City
HENDERSON
State
NV
ZIP
89012
Mailing
323 ORVILLE WRIGHT COURT, LAS VEGAS, NV 89119
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
SIC code (legacy)
1751
Employees
3
Ownership type
A
Industry flags
Construction safety.

2 citations on file for this inspection.

618037501

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 3, 2008
Abate by
Mar 6, 2008
Penalty
Initial $2,500 · Current $1,500 Reduced
Nevada Revised Statute 618.375(1):  The employer did not furnish
employment and a place of
employment which was free from recognized hazards that were causing or
likely to cause death
or serious physical harm to employees:
The employer failed to ensure that employees maintained firm footing on
the floor of a personnel
platform and abstained from using railings to achieve additional reach or
height while working
from a personnel platform that was attached to a rough terrain forklift,
as follows:
a.At Crowne Professional Park at Stephanie construction site, 50 South
Stephanie
Street, Henderson, NV 89012, framing activities, two employees were exposed
to a fall hazard as a result of not maintaining a firm footing on the
floor of a
personnel platform and using railings for the purpose of achieving
additional
reach or height while working at an elevation of approximately 20 to 25
feet
without proper fall protection equipment/attire.
Reference: ANSI/ITSDF B.56.6-2005 Safety Standard for Rough Terrain
Forklift
Trucks, Section 5.15, Paragraph 5.15.1, Subparagraph (u)
Paragraph 5.15.1 Elevating Personnel, Subparagraph (u): personnel are to
maintain firm footing on platform floor unless secured by body belt and
lanyard.
Use of railings, planks, ladders, etc., on the platform for purpose of
achieving
additional reach or height is prohibited;
One feasible means of abatement would be to require employees to complete a
refresher course in fall protection safety germane to the subject of
scaffolding as
it relates to personnel platforms that are attached to rough terrain
forklifts for the
purpose of elevating personnel.
Recent events (2)
  • — I (S) $1500.00
  • — Z (S) $2500.00

618037501

Other-than-serious Gravity 05 1 instance 2 exposed
Issued
Mar 3, 2008
Abate by
Mar 6, 2008
Penalty
Initial $1,225 · Current $500 Reduced
Nevada Revised Statute 618.375(1):  The employer did not furnish
employment
and a place of
employment which was free from recognized hazards that were causing or
likely to cause death
or serious physical harm to employees:
The employer failed to ensure that operators blocked the truck wheels when
not in the operating
position of a rough terrain forklift while elevating personnel, as follows:
a.At Crowne Professional Park at Stephanie construction site, 50 South
Stephanie
Street, Henderson, NV 89012, framing activities, two employees were exposed
falls while working at an elevation of approximately 20 to 25 feet when the
operator of the rough terrain forklift failed to block the truck wheels
when not in
the operating position.
Reference: ANSI/ITSDF B.56.6-2005 Safety Standard for Rough Terrain
Forklift
Trucks, Section 5.15, Paragraph 5.15.1, Subparagraph (s)
Paragraph 5.15.1 Elevating Personnel, Subparagraph (s): When the operator
is
not in the operating position, block the truck wheels...
One feasible means of abatement would be to require the operator of the
rough
terrain forklift to complete a refresher course in forklift safety.t
Recent events (2)
  • — I (O) $500.00
  • — Z (S) $1225.00

View Tradewinds Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311637953.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.