MONROE, NC ·
OSHA Inspection: STONE SYSTEMS OF NORTH CAROLINA, LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of STONE SYSTEMS OF NORTH CAROLINA, LLC in 2889 GRAY FOX RD., MONROE, NC 28110 (NAICS 327991). OSHA activity number 311795892.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STONE SYSTEMS OF NORTH CAROLINA, LLC
- Site address
- 2889 GRAY FOX RD.
- City
- MONROE
- State
- NC
- ZIP
- 28110
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- SIC code (legacy)
- 3281
- Employees
- 63
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
24 citations on file for this inspection.
95012901
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
- Penalty
- Initial $1,050 · Current $1,050
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely cause death or serious physical harm to employees in that employees were exposed to struck-by or caught-in-between hazards: a)facility, forklift trucks were installed with an overhead guard, but seat belts were not worn by forklift operators, exposing those employees to a struck-by hazard in the event of the forklift overturning. Among other methods, one feasible and acceptable abatement method to correct this hazard is to require employees to wear seat belts when operating forklift trucks. Reference: American Society of Mechanical Engineers, Safety Standard for Low Lift and High Lift trucks, ASME B56.1-1993, paragraph 5.3.19: An active operator protection device or system, when provided, shall be used.
1910.23 C01
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
- Penalty
- Initial $1,050 · Current $1,050
1910.95 C01
- Issued
- Mar 28, 2008
- Abate by
- May 14, 2008
- Penalty
- Initial $1,050 · Current $1,050
8110
1910.133 A01
- Issued
- Mar 28, 2008
- Abate by
- Apr 2, 2008
- Penalty
- Initial $750 · Current $750
1910.178 L01 I
- Issued
- Mar 28, 2008
- Abate by
- Apr 2, 2008
- Penalty
- Initial $1,050 · Current $1,050
1910.179 J02
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
- Penalty
- Initial $1,050 · Current $1,050
1910.243 C04
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
- Penalty
- Initial $750 · Current $750
1910.1000 C
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
- Penalty
- Initial $750 · Current $750
9010
1910.1000 E
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
9010
1910.134 C01
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
9010
1910.134 D01 I
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
9010
1910.134 E01
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
9010
1910.134 F01
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
9010
1910.134 K03
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
9010
1910.22 D01
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
1910.37 B02
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
1910.37 B05
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
1910.132 D02
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
1910.146 C01
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
1910.305 G02 III
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
1910.1200 E01
- Issued
- Mar 28, 2008
- Abate by
- May 14, 2008
1910.1200 F05 I
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
1910.1200 G01
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
1910.1200 H01
- Issued
- Mar 28, 2008
- Abate by
- Apr 16, 2008
More inspections in this industry (NAICS 327991)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311795892.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.