PUTNAM, CT — 2010-06-23 00:00:00

OSHA Inspection: PUTNAM PRECISION MOLDING, INC.

Planned inspection · Safety discipline

At a glance

On 2010-06-23 00:00:00, OSHA opened a planned safety inspection of PUTNAM PRECISION MOLDING, INC. in 11 DANCO ROAD, PUTNAM, CT 06260 (NAICS 326199). OSHA activity number 311796569.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Putnam Precision Molding, INC. — free Get an email when a new federal OSHA severe-injury report for Putnam Precision Molding, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: PUTNAM PRECISION MOLDING, INC.
Site address: 11 DANCO ROAD
City: PUTNAM
State: CT
ZIP: 06260

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Complete (A)
Discipline: Safety
Advance notice: No
Union status: Y

When did the case open and close?

Opened: 2010-06-23 00:00:00
Closing conference: 2010-06-24 00:00:00
Case closed: 2011-03-23 00:00:00
Last modified: 2011-03-23 00:00:00
Data loaded: 2011-10-14 16:38:47

Establishment context

NAICS code: 326199
SIC code (legacy): 3089
Employees: 56
Ownership type: A

Citations

11 citations on file for this inspection.

5(a)(1)

Serious Gravity 02 1 instance 2 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010
Penalty: Initial $500 · Current $250 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not furnish employment
and a place of employment which were free from recognized hazards that
were causing or likely to cause
death or serious physical harm to employees in that employees were exposed
to
potential flying objects:
Tool Room:  A Type 1 straight wheel was used in the Gorton Cutter Grinder
to grind ejector pins and was
subject to side grinding.  The Type 1 wheel was designed for grinding on
the periphery of the wheel, not on
the side of the wheel.
Among other methods, one feasible and acceptable abatement method to
correct this hazard is to provide the
proper type of wheel, such as a Type 6 cup wheel, in the cutter grinder
where the intended grinding face is
located on the side of the wheel.d

Recent events (2)

2010-08-12 00:00:00 — I (S) $250.00
2010-08-04 00:00:00 — Z (S) $500.00

1910.22 A01

Serious Gravity 02 1 instance 3 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010
Penalty: Initial $500 · Current $250 Reduced

Recent events (2)

2010-08-12 00:00:00 — I (S) $250.00
2010-08-04 00:00:00 — Z (S) $500.00

1910.215 B05

Serious Gravity 02 1 instance 2 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010
Penalty: Initial $500 · Current $250 Reduced

Recent events (2)

2010-08-12 00:00:00 — I (S) $250.00
2010-08-04 00:00:00 — Z (S) $500.00

1910.219 E03 I

Serious Gravity 02 4 instances 10 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010
Penalty: Initial $500 · Current $250 Reduced

Recent events (2)

2010-08-12 00:00:00 — I (S) $250.00
2010-08-04 00:00:00 — Z (S) $500.00

1910.303 G01 IA

Serious Gravity 03 2 instances 2 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010
Penalty: Initial $625 · Current $313 Reduced

Recent events (2)

2010-08-12 00:00:00 — I (S) $312.50
2010-08-04 00:00:00 — Z (S) $625.00

1910.305 F

Serious Gravity 01 1 instance 10 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010
Penalty: Initial $375 · Current $188 Reduced

Recent events (2)

2010-08-12 00:00:00 — I (S) $187.50
2010-08-04 00:00:00 — Z (S) $375.00

1910.305 G01 IV

Serious Gravity 03 6 instances 10 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010
Penalty: Initial $625 · Current $313 Reduced

Recent events (2)

2010-08-12 00:00:00 — I (S) $312.50
2010-08-04 00:00:00 — Z (S) $625.00

1910.332 B01

Serious Gravity 03 1 instance 2 exposed

Issued: Aug 4, 2010
Abate by: Mar 20, 2011
Penalty: Initial $625 · Current $313 Reduced

Recent events (3)

2010-10-12 00:00:00 — P (S) $312.50
2010-08-12 00:00:00 — I (S) $312.50
2010-08-04 00:00:00 — Z (S) $625.00

1910.335 A01 I

Serious Gravity 05 1 instance 2 exposed

Issued: Aug 4, 2010
Abate by: Mar 20, 2011

Recent events (3)

2010-10-12 00:00:00 — P (S)
2010-08-12 00:00:00 — I (S)
2010-08-04 00:00:00 — Z (S)

1910.157 G02

Other-than-serious Gravity 01 1 instance 51 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010

1910.1200 E01 II

Other-than-serious Gravity 01 1 instance 56 exposed

Issued: Aug 4, 2010
Abate by: Sep 20, 2010

More inspections at Putnam Precision Molding, INC.

Feb 4, 2015 PUTNAM, CT Dec 16, 2013 PUTNAM, CT Nov 6, 2009 PUTNAM, CT Oct 13, 2005 PUTNAM, CT

View Putnam Precision Molding, INC.'s full OSHA safety record →

More inspections in this industry (NAICS 326199)

Jul 16, 2026 Rehrig Pacific Company · LAWRENCEVILLE, GA Jul 14, 2026 Caplugs, LLC · ERIE, PA Jul 13, 2026 G & W Precision · WHATELY, MA Jul 13, 2026 Western Fiberglass INC. · SANTA ROSA, CA Jul 13, 2026 Continental Structural Plastics · CONNEAUT, OH

More inspections in CT

Jul 16, 2026 Bianco & Sons, LLC · EAST HAVEN, CT Jul 16, 2026 Moms Enfield · ENFIELD, CT Jul 16, 2026 Harbor Freight · DAYVILLE, CT Jul 14, 2026 Jananii, LLC · NEW BRITAIN, CT Jul 14, 2026 Truss Manufacturing INC · NEWINGTON, CT

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311796569.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.