PERRYVILLE, AR —
OSHA Inspection: DAYCO CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DAYCO CONSTRUCTION in 325 CEDAR STREET, PERRYVILLE, AR 72126 (NAICS 236220). OSHA activity number 312352560.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAYCO CONSTRUCTION
- Site address
- 325 CEDAR STREET
- City
- PERRYVILLE
- State
- AR
- ZIP
- 72126
- Mailing
- 30 NORTH ROAD, DAMASCUS, AR 72039
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- SIC code (legacy)
- 1542
- Employees
- 12
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 20, 2008
- Abate by
- Oct 30, 2008
- Penalty
- Initial $1,500 · Current $700 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: On or about October 1, 2008, at the job site located at 492 Highway 25, North, Guy, Arkansas, an employee installing bar joists from the platform of a scissor lift while a Skytrak operator lowered bar joists in place, was exposed to the hazards of being struck by the load as it was being lowered above his head. Among other methods, one feasible and acceptable abatement method to correct this hazard is to have the employee move the scissor lift from beneath the load until it rested on the supports before performing welding operations.
Recent events (2)
- — I (O) $700.00
- — Z (S) $1500.00
1926.100 A
- Issued
- Oct 20, 2008
- Abate by
- Oct 30, 2008
Recent events (2)
- — I (O)
- — Z (S)
5(a)(1)
- Issued
- Oct 20, 2008
- Abate by
- Nov 14, 2008
- Penalty
- Initial $1,500 · Current $800 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: On or about October 1, 2008, at the job site located at 492 Highway 25, North, Guy, Arkansas, the employer did not use an approved lifting attachment when lifting a free rigged bar joist via a sling placed over the tines of a Skytrak 8042 for a below the tines lift, exposing employees to the hazards of being struck by the load in the event it slipped off the forks. Among other methods, one feasible and acceptable abatement method to correct this hazard is to (1) ensure that an approved lifting hook or other attachment approved by the manufacturer is used when lifting a load and (2) use the pins provided on the attachment to secure the lifting hook behind the heel of each fork to protect against the attachment being disengaged from the forks.
Recent events (2)
- — I (S) $800.00
- — Z (S) $1500.00
5(a)(1)
- Issued
- Oct 20, 2008
- Abate by
- Oct 23, 2008
- Penalty
- Initial $1,500 · Current $800 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: On or about October 1, 2008, at the job site located at 492 Highway 25, North, Guy, Arkansas, an employee was working from a Genie GS-2632 scissor lift platform extended to approximately 11 feet above the level below, riding in the scissor lift from one location to another while the access gate was not closed, exposing the employee to the hazards of a fall from elevation. Among other methods, one feasible and acceptable abatement method to correct this hazard is to ensure the gate is closed when the self-propelled elevating work platform is in the raised position as required by ANSI/SIA A92.6-1990, 7.9 During Operations, item (3) which states "The guardrails are installed and access gates or openings are closed per manufacturer's instructions." or in the Alternative 29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms: On or about October 1, 2008, at the job site located at 492 Highway 25, North, Guy, Arkansas, an employee was working from a Genie GS-2632 scissor lift platform extended to approximately 11 feet above the level below, riding in the scissor lift from one location to another while the access gate was not closed, exposing the employee to the hazards of a fall from elevation.
Recent events (2)
- — I (S) $800.00
- — Z (S) $1500.00
1926.350 A09
- Issued
- Oct 20, 2008
- Abate by
- Oct 23, 2008
- Penalty
- Initial $300 · Current $200 Reduced
Recent events (2)
- — I (O) $200.00
- — Z (S) $300.00
1926.405 B01
- Issued
- Oct 20, 2008
- Abate by
- Oct 23, 2008
- Penalty
- Initial $375 · Current $200 Reduced
Recent events (2)
- — I (O) $200.00
- — Z (S) $375.00
1926.501 B10
- Issued
- Oct 20, 2008
- Abate by
- Oct 23, 2008
- Penalty
- Initial $1,500 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1500.00
1926.454 A
- Issued
- Oct 20, 2008
- Abate by
- Nov 14, 2008
Recent events (2)
- — I (O)
- — Z (O)
1926.503 A02
- Issued
- Oct 20, 2008
- Abate by
- Nov 21, 2008
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 H
- Issued
- Oct 20, 2008
- Abate by
- Nov 21, 2008
- Penalty
- Initial $150
Recent events (2)
- — I (O)
- — Z (O) $150.00
More inspections at Dayco Construction
View Dayco Construction's full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 312352560.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.