Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BROADWAY 36 REALTY LLC

Accident-driven inspection · Safety discipline

On , OSHA opened an accident-driven safety inspection of BROADWAY 36 REALTY LLC in 29 WEST 36TH STREET, NEW YORK, NY 10018 (NAICS 531120). OSHA activity number 312497993.

Watch Broadway 36 Realty LLC — free Get an email when a new federal OSHA severe-injury report for Broadway 36 Realty LLC is published. One employer, no account, unsubscribe in one click.
Site address
29 WEST 36TH STREET
City
NEW YORK
State
NY
ZIP
10018
Mailing
C/O WINOKER REALTY CO. 462 7TH AVE (FL 12A), NEW YORK, NY 10018
Inspection type
Accident-driven (A)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Y
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
531120
SIC code (legacy)
6512
Employees
3
Ownership type
A

1 citation on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1500.00 · Current $750.00 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to crushing and falling hazards:
a)Freight elevator operators control handle at 29 West 36th Street:
Handle of
lever-type operating device of freight elevators did not return to the
stop position
and latch there automatically when the hand of the operator was removed.
On
or about 9/12/08.
b)Freight elevator car gate at 29 West 36th Street:  Freight elevator car
gate
electro-mechanical interlock was bypassed with tape so that the elevator
could run
with the gate open.  On or about 9/12/08.
c)Freight elevator north shaft door on the 5th floor at 29 West 36th
Street:
The
freight elevator shaft door electro-mechanical interlock was bypassed
internally
with a jumper wire.  On or about 9/12/08.
Among other methods, one feasible and acceptable method to correct this
hazard is:
1)Comply with American Society of Mechanical Engineers A17.3-2002, 3.10.2
by
repairing and maintaining lever-type operating devices of freight
elevators so that
they return to the stop position and latch there when the hand of the
operator is
removed.
2)Comply with American Society of Mechanical Engineers A17.3-2002, 3.10.7
and
remove devices which render hoistway door interlocks or car door or gate
electric
contacts inoperative.
3)Instruct employees on the danger of bypassing the elevator locks,
interlocks,
and
/ or switches.
4)Inspect all elevator locks, interlocks, and / or switches for objects
used to bypass
them. Remove objects found and do not allow use/operation of the elevators
doors
/ cars until the objects are removed.
NOTE:  IN ADDITION TO CERTIFICATION OF ABATEMENT, THE
EMPLOYER IS REQUIRED TO SUBMIT DOCUMENTATION OF ABATEMENT
FOR THIS ITEM.  FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL
PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (2)
  • — F (S) $750.00
  • — Z (S) $1500.00

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 312497993.