DANIELSVILLE, GA —
OSHA Inspection: GEORGIA METALS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GEORGIA METALS, INC. in 539 GENERAL DANIEL AVENUE, DANIELSVILLE, GA 30633 (NAICS 332111). OSHA activity number 312527062.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GEORGIA METALS, INC.
- Site address
- 539 GENERAL DANIEL AVENUE
- City
- DANIELSVILLE
- State
- GA
- ZIP
- 30633
- Mailing
- P.O. BOX 548, DANIELSVILLE, GA 30633
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332111
- SIC code (legacy)
- 3462
- Employees
- 18
- Ownership type
- A
Citations
19 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $750 · Current $700 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that forklift operators were exposed to struck-by and crush hazards when being thrown out of the vehicle in case of collision or tip over. On or about 06/17/09: a) Plant - Employees operated the 120 Hyster XL2 No 8 forklift without a seatbelt installed in the vehicle. Among other methods, one feasible and acceptable abatement method to correct this hazard is to require and ensure that employees utilize the operator restraint system (seat belt) as required by ANSI B56.1 consensus standard for powered industrial trucks, and ASME B56.1 2000-Safety Standard for Low Lift and High Lift Trucks. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $700.00
- — Z (S) $750.00
1910.147 C04 I
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $1,500 · Current $1,300 Reduced
Recent events (2)
- — I (S) $1300.00
- — Z (S) $1500.00
1910.178 P01
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $600 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $600.00
1910.212 A01
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $750 · Current $700 Reduced
Recent events (2)
- — I (S) $700.00
- — Z (S) $750.00
1910.219 C04 I
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
1910.212 A03 II
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $1,500
Recent events (2)
- — I (S)
- — Z (S) $1500.00
1910.215 A04
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $600 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $600.00
1910.215 B09
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
1910.219 F03
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $750 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $750.00
1910.303 B01
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $600 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $600.00
1910.305 B01 II
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $600 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $600.00
1910.305 B02
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $450 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $450.00
1910.305 G02 III
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $600 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $600.00
1904.1 A02
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
- Penalty
- Initial $300 · Current $300
1910.132 D02
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
1910.178 L06
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
1910.1200 E01
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
1910.1200 G01
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
1910.1200 H01
- Issued
- Aug 12, 2009
- Abate by
- Sep 8, 2009
More inspections at Georgia Metals, INC.
View Georgia Metals, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332111)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 312527062.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.