TALLADEGA, AL —
OSHA Inspection: TALLADEGA CASTINGS & MACHINE CO., INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TALLADEGA CASTINGS & MACHINE CO., INC. in 228 NORTH COURT STREET, TALLADEGA, AL 35160 (NAICS 331513). OSHA activity number 312563067.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TALLADEGA CASTINGS & MACHINE CO., INC.
- Site address
- 228 NORTH COURT STREET
- City
- TALLADEGA
- State
- AL
- ZIP
- 35160
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331513
- SIC code (legacy)
- 3325
- Employees
- 54
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
11 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 24, 2009
- Abate by
- Mar 6, 2009
- Penalty
- Initial $3,500 · Current $2,625 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards: (a)On or about 10/24/08, hooks on overhead cranes and under-hung hoist in areas including, but not limited to, Maintenance, Shipping, Cleaning, Ladle, Melt, and Heat Treat area(s), did not have safety latches installed. (b)On or about 10/24/08, hooks installed on overhead cranes and under-hung hoists in areas including, but not limited to, Maintenance, Shipping, Cleaning, Ladle, Melt, and Heat Treat area(s), were damaged. Among other methods, one feasible and acceptable method to correct this hazard would be to comply with the requirements of the American Society of Mechanical Engineers Standard ASME B30.10-1993, Hooks, Section 10-1.1.1.2(b).
Recent events (2)
- — I (S) $2625.00
- — Z (S) $3500.00
5(a)(1)
- Issued
- Feb 24, 2009
- Abate by
- Mar 6, 2009
- Penalty
- Initial $3,500 · Current $2,625 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards: (a)On or about 10/24/08, shop fabricated lifting devices in areas including, but not limited to, Maintenance, Shipping, Cleaning, Ladle, Melt, and Heat Treat area(s), were not load rated. Among other methods, one feasible and acceptable method to correct this hazard would be to comply with the requirements of the American Society of Mechanical Engineers Standard ASME B30.20-1993, Below-the-Hook Lifting Devices, Section 20-1.2.1(a).
Recent events (2)
- — I (S) $2625.00
- — Z (S) $3500.00
1910.23 C01
- Issued
- Feb 24, 2009
- Abate by
- Mar 6, 2009
- Penalty
- Initial $1,750 · Current $1,313 Reduced
Recent events (2)
- — I (S) $1313.00
- — Z (S) $1750.00
1910.67 C02 V
- Issued
- Feb 24, 2009
- Abate by
- Mar 4, 2009
- Penalty
- Initial $1,400 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1400.00
1910.125 F03 III
- Issued
- Feb 24, 2009
- Abate by
- Mar 4, 2009
- Penalty
- Initial $1,400 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1400.00
1910.132 A
- Issued
- Feb 24, 2009
- Abate by
- Mar 6, 2009
- Penalty
- Initial $3,500 · Current $2,625 Reduced
Recent events (2)
- — I (S) $2625.00
- — Z (S) $3500.00
1910.146 C05
- Issued
- Feb 24, 2009
- Abate by
- Mar 6, 2009
- Penalty
- Initial $1,750 · Current $1,313 Reduced
Recent events (2)
- — I (S) $1313.00
- — Z (S) $1750.00
1910.176 B
- Issued
- Feb 24, 2009
- Abate by
- Mar 6, 2009
- Penalty
- Initial $1,400 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1400.00
1910.242 B
- Issued
- Feb 24, 2009
- Abate by
- Mar 6, 2009
- Penalty
- Initial $1,400 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1400.00
1910.254 D09 III
- Issued
- Feb 24, 2009
- Abate by
- Mar 6, 2009
- Penalty
- Initial $1,400 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1400.00
1910.305 B02 I
- Issued
- Feb 24, 2009
- Abate by
- Mar 4, 2009
- Penalty
- Initial $1,750 · Current $1,312 Reduced
Recent events (2)
- — I (S) $1312.00
- — Z (S) $1750.00
More inspections in this industry (NAICS 331513)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 312563067.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.