BLOOMINGTON, IL —
OSHA Inspection: RPS PRODUCTS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of RPS PRODUCTS, INC. in 903 S. MORRISSEY DR., BLOOMINGTON, IL 61701 (NAICS 322223). OSHA activity number 312889496.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch RPS Products, INC. — free
Get an email when a new federal OSHA severe-injury report for RPS Products, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- RPS PRODUCTS, INC.
- Site address
- 903 S. MORRISSEY DR.
- City
- BLOOMINGTON
- State
- IL
- ZIP
- 61701
- Mailing
- 281 KEYES AVE., HAMPSHIRE, IL 60140
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322223
- SIC code (legacy)
- 2673
- Employees
- 35
- Ownership type
- A
Citations
27 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $1,250 · Current $1,250
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Employees loading P88731NAT 51" paper on the Reelite 1 ton hoist system located on the Paper Compactor machine were exposed to crush-by hazards and the employer did not ensure the hoist was not loaded in excess of its rated load. ASME B30.16-2007 Overhead Hoists (Underhung): Section 16-3.2.1: "The hoist shall not be loaded in excess of its rated load except for test purposes as provided in paragraph 16-2.2.2 or for planned engineered lifts as provided in paragraph 16-3.2.2" Among other methods, feasible and acceptable abatement methods to correct this
Recent events (2)
- — I (S) $1250.00
- — Z (S) $1250.00
5(a)(1)
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $1,250 · Current $1,250
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that hazard is to comply with ASME B30.16-2007 Overhead Hoists (Underhung), including but not limited to: a) Ensure the hoist system being used can safely handle the load being lifted and the load is not in excess of the rated load. ***Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d)***
Recent events (2)
- — I (S) $1250.00
- — Z (S) $1250.00
5(a)(1)
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $2,500 · Current $2,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Employees loading P88731NAT 51" paper on the Reelite 1 ton hoist system located on the Paper Compactor machine were exposed to crush-by hazards and the employer did not ensure the hoist was not loaded in excess of its rated load. ASME B30.16-2007 Overhead Hoists (Underhung): Section 16-3.2.1: "The hoist shall not be loaded in excess of its rated load except for test purposes as provided in paragraph 16-2.2.2 or for planned engineered lifts as provided in paragraph 16-3.2.2" Among other methods, feasible and acceptable abatement methods to correct this hazard is to comply with ASME B30.16-2007 Overhead Hoists (Underhung), including but not limited to: a) Ensure the hoist system being used can safely handle the load being lifted and the load is not in excess of the rated load. ***Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d)***
Recent events (2)
- — I (S) $2500.00
- — Z (S) $2500.00
1910.37 A03
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $1,000
Recent events (2)
- — I (O)
- — Z (S) $1000.00
1910.95 C01
- Issued
- Nov 27, 2009
- Abate by
- Jan 30, 2010
- Penalty
- Initial $2,500 · Current $2,000 Reduced
Recent events (2)
- — I (S) $2000.00
- — Z (S) $2500.00
1910.147 C04 I
- Issued
- Nov 27, 2009
- Abate by
- Dec 11, 2009
- Penalty
- Initial $2,500 · Current $2,500
1910.147 C04 II
- Issued
- Nov 27, 2009
- Abate by
- Dec 11, 2009
1910.147 C07 I
- Issued
- Nov 27, 2009
- Abate by
- Dec 11, 2009
- Penalty
- Initial $2,500 · Current $2,500
Recent events (2)
- — I (S) $2500.00
- — Z (S) $2500.00
1910.147 D04 I
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $2,500 · Current $2,500
Recent events (2)
- — I (S) $2500.00
- — Z (S) $2500.00
1910.157 C01
- Issued
- Nov 27, 2009
- Abate by
- Dec 2, 2009
- Penalty
- Initial $750
Recent events (2)
- — I (O)
- — Z (S) $750.00
1910.212 A01
- Issued
- Nov 27, 2009
- Abate by
- Dec 16, 2009
- Penalty
- Initial $2,500 · Current $2,500
1910.219 F01
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $2,500 · Current $2,500
Recent events (2)
- — I (S) $2500.00
- — Z (S) $2500.00
1910.219 F03
- Issued
- Nov 27, 2009
- Abate by
- Dec 16, 2009
- Penalty
- Initial $2,500 · Current $2,500
Recent events (2)
- — I (S) $2500.00
- — Z (S) $2500.00
1910.303 G02 I
- Issued
- Nov 27, 2009
- Abate by
- Dec 2, 2009
- Penalty
- Initial $1,000 · Current $1,000
Recent events (2)
- — I (S) $1000.00
- — Z (S) $1000.00
1910.304 F01 VII
- Issued
- Nov 27, 2009
- Abate by
- Dec 16, 2009
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.305 B01
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $1,000 · Current $1,000
Recent events (2)
- — I (S) $1000.00
- — Z (S) $1000.00
1910.305 G01 IVA
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $1,000 · Current $1,000
5(a)(1)
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $1,250 · Current $1,625
Recent events (2)
- — I (S) $1625.00
- — Z (S) $1250.00
5(a)(1)
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $1,250
Recent events (2)
- — I (S)
- — Z (S) $1250.00
5(a)(1)
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $2,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Employees loading P88731NAT 51" paper on the Reelite 1 ton hoist system located on the Paper Compactor machine were exposed to crush-by hazards and the employer did not ensure the hoist was not loaded in excess of its rated load. ASME B30.16-2007 Overhead Hoists (Underhung): Section 16-3.2.1: "The hoist shall not be loaded in excess of its rated load except for test purposes as provided in paragraph 16-2.2.2 or for planned engineered lifts as provided in paragraph 16-3.2.2" Among other methods, feasible and acceptable abatement methods to correct this hazard is to comply with ASME B30.16-2007 Overhead Hoists (Underhung), including but not limited to: a) Ensure the hoist system being used can safely handle the load being lifted and the load is not in excess of the rated load. ***Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d)***
Recent events (2)
- — I (S)
- — Z (S) $2500.00
1910.147 C07 I
- Issued
- Nov 27, 2009
- Abate by
- Dec 11, 2009
- Penalty
- Initial $2,500 · Current $1,500 Reduced
Recent events (2)
- — I (S) $1500.00
- — Z (S) $2500.00
1910.147 D04 I
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $2,500
Recent events (2)
- — I (S)
- — Z (S) $2500.00
1910.219 F01
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $2,500 · Current $1,500 Reduced
Recent events (2)
- — I (S) $1500.00
- — Z (S) $2500.00
1910.219 F03
- Issued
- Nov 27, 2009
- Abate by
- Dec 16, 2009
- Penalty
- Initial $2,500
Recent events (2)
- — I (S)
- — Z (S) $2500.00
1910.303 G02 I
- Issued
- Nov 27, 2009
- Abate by
- Dec 2, 2009
- Penalty
- Initial $1,000 · Current $1,000
Recent events (2)
- — I (S) $1000.00
- — Z (S) $1000.00
1910.305 B01
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
- Penalty
- Initial $1,000
Recent events (2)
- — I (S)
- — Z (S) $1000.00
1910.134 C02 I
- Issued
- Nov 27, 2009
- Abate by
- Dec 7, 2009
More inspections at RPS Products, INC.
Mar 16, 2012
HAMPSHIRE, IL
Dec 9, 2011
HAMPSHIRE, IL
Dec 30, 2010
BLOOMINGTON, IL
Feb 12, 1974
Monroeville, PA
View RPS Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 322223)
May 21, 2025
158899 - STS Packaging Charlotte, LLC · CHARLOTTE, NC
Feb 24, 2025
67766 - Takigawa Corporation America · BARDSTOWN, KY
Aug 12, 2022
WA317969965 - Murpak LLC · YAKIMA, WA
Feb 4, 2020
Novolex Bagcraft, INC. DBA Duro BAG Manufacturing CO. · ALSIP, IL
Nov 12, 2019
Omega Plastics Corporation · LYNDHURST, NJ
More inspections in IL
Jul 17, 2026
Quantum Technical Services INC. · FRANKFORT, IL
Jul 17, 2026
Augustana College · ROCK ISLAND, IL
Jul 17, 2026
Sunrun Installation Services, INC. · WASHINGTON, IL
Jul 17, 2026
Conservation of Sculpture & Objects Studio, INC. · FOREST PARK, IL
Jul 17, 2026
Proflow Pumping Solutions · BLUE ISLAND, IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 312889496.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.