LAS VEGAS, NV —
OSHA Inspection: SOUTHERN NEVADA MECHANICAL COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SOUTHERN NEVADA MECHANICAL COMPANY, INC. in 4055 PALOS VERDES STREET, LAS VEGAS, NV 89119 (NAICS 238220). OSHA activity number 312905268.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTHERN NEVADA MECHANICAL COMPANY, INC.
- Site address
- 4055 PALOS VERDES STREET
- City
- LAS VEGAS
- State
- NV
- ZIP
- 89119
- Mailing
- 2956 MARCO STREET, LAS VEGAS, NV 89115
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- SIC code (legacy)
- 1711
- Employees
- 6
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
2 citations on file for this inspection.
618037501
- Issued
- Jun 9, 2009
- Abate by
- Jun 12, 2009
- Penalty
- Initial $75 · Current $75
General-duty citation text
Nevada Revised Statute 618.375(1): Every employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or were likely to cause death or serious physical harm to his employees: The employer did not ensure that a valve protection cap was in place as follows: a.On the first floor of the Blackstone Hotel construction site, a green nitrogen cylinder was standing behind the entrance door. The cylinder was used to ensure that they were no leaks in the copper lines that run from the evaporative cooler to the condenser. The nitrogen cylinder did not have a valve protection cap located over the pressure valve nozzle. Reference: CGA P-1-2000-Page 8, 3.4.1 Valve Protection Caps: Valve protection caps for a cylinder designed to accept a cap shall always be in place and hand tight except when cylinders are secured, in use, or connected for use. A feasible means of abatement would be to follow the Compressed Gas Association guidelines and place a cap over the pressure valve nozzle.
618037501
- Issued
- Jun 9, 2009
- Abate by
- Jun 12, 2009
General-duty citation text
Nevada Revised Statute 618.375(1): Every employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or were likely to cause death or serious physical harm to his employees: The employer failed to ensure that a compressed gas cylinder was secured as follows: a.Behind the eastside entrance at the Blackstone Hotel, a compressed gas cylinder was not secured to prevent it from being knocked over or damaged by passing or falling objects. Reference: CGA P-1-2000-Page 9, 3.7.4 Cylinder positions in storage: All compressed gas cylinders in service or in storage at user locations shall be secured to prevent falling or rolling. A feasible means of abatement would be to ensure that all cylinders are secured as per the Compressed Gas Association guidelines.
More inspections at Southern Nevada Mechanical Company, INC.
View Southern Nevada Mechanical Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238220)
More inspections in NV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 312905268.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.