ANNISTON, AL · 2009-02-24 00:00:00

OSHA Inspection: AMPRO MOLDING, LLC

Planned inspection · Safety discipline

At a glance

On 2009-02-24 00:00:00, OSHA opened a planned safety inspection of AMPRO MOLDING, LLC in 318 PAPPY DUNN BOULEVARD, ANNISTON, AL 36205 (NAICS 326199). OSHA activity number 312933252.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ampro Molding, LLC for free Get an email when a new federal OSHA severe-injury report for Ampro Molding, LLC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: AMPRO MOLDING, LLC
Site address: 318 PAPPY DUNN BOULEVARD
City: ANNISTON
State: AL
ZIP: 36205

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Complete (A)
Discipline: Safety
Advance notice: No
Union status: N

When did the case open and close?

Opened: 2009-02-24 00:00:00
Closing conference: 2009-08-19 00:00:00
Case closed: 2009-09-14 00:00:00
Last modified: 2009-09-14 00:00:00
Data loaded: 2011-10-14 16:38:47

Establishment context

NAICS code: 326199
SIC code (legacy): 3089
Employees: 110
Ownership type: A
Industry flags: Manufacturing safety.

Citations

10 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 1 exposed

Issued: Aug 20, 2009
Abate by: Aug 26, 2009
Penalty: Initial $1,375 · Current $750 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to crushed-by hazards:
(a)On or about June 9, 2009 - C&D Department, an employee was operating a
forklift without utilizing the restraint device.
Among other methods, one feasible and acceptable method to correct this
hazard would be to
ensure that all forklift drivers utilize the restraint devices provided on
the forklifts. As stated in
ASME B56.1-1993 - Safety Standard for Low Lift and High Lift Trucks,
Section 7.39, Operator
Restraint Systems.t

Recent events (2)

2009-09-08 00:00:00 · I (S) $750.00
2009-08-20 00:00:00 · Z (S) $1375.00

1910.178 L05

Serious Gravity 03 1 instance 1 exposed

Issued: Aug 20, 2009
Abate by: Aug 28, 2009
Penalty: Initial $1,375 · Current $750 Reduced

Recent events (2)

2009-09-08 00:00:00 · I (S) $750.00
2009-08-20 00:00:00 · Z (S) $1375.00

1910.253 B04 III

Serious Gravity 03 1 instance 2 exposed

Issued: Aug 20, 2009
Abate by: Aug 26, 2009
Penalty: Initial $1,375 · Current $500 Reduced

Recent events (2)

2009-09-08 00:00:00 · I (S) $500.00
2009-08-20 00:00:00 · Z (S) $1375.00

1910.303 B02

Serious Gravity 02 5 instances 6 exposed

Issued: Aug 20, 2009
Abate by: Sep 2, 2009
Penalty: Initial $1,100 · Current $1,000 Reduced

Recent events (2)

2009-09-08 00:00:00 · I (S) $1000.00
2009-08-20 00:00:00 · Z (S) $1100.00

1910.303 G01 I

Serious Gravity 03 2 instances 2 exposed

Issued: Aug 20, 2009
Abate by: Sep 2, 2009
Penalty: Initial $1,375 · Current $1,000 Reduced

Recent events (2)

2009-09-08 00:00:00 · I (S) $1000.00
2009-08-20 00:00:00 · Z (S) $1375.00

1910.305 B01 II

Serious Gravity 03 3 instances 2 exposed

Issued: Aug 20, 2009
Abate by: Sep 2, 2009
Penalty: Initial $1,375 · Current $500 Reduced

Recent events (2)

2009-09-08 00:00:00 · I (S) $500.00
2009-08-20 00:00:00 · Z (S) $1375.00

1910.305 G02 III

Serious Gravity 03 3 instances 5 exposed

Issued: Aug 20, 2009
Abate by: Sep 10, 2009
Penalty: Initial $1,375 · Current $1,000 Reduced

Recent events (2)

2009-09-08 00:00:00 · I (S) $1000.00
2009-08-20 00:00:00 · Z (S) $1375.00

1910.305 G01 IVA

Serious Gravity 03 3 instances 4 exposed

Issued: Aug 20, 2009
Abate by: Sep 10, 2009
Penalty: Initial $1,375 · Current $500 Reduced

Recent events (2)

2009-09-08 00:00:00 · I (S) $500.00
2009-08-20 00:00:00 · Z (S) $1375.00

1910.132 D02

Other-than-serious Gravity 01 1 instance 110 exposed

Issued: Aug 20, 2009
Abate by: Sep 10, 2009

Recent events (2)

2009-09-08 00:00:00 · I (O)
2009-08-20 00:00:00 · Z (O)

1910.1030 C01 I

Other-than-serious Gravity 01 1 instance 13 exposed

Issued: Aug 20, 2009
Abate by: Sep 23, 2009

Recent events (2)

2009-09-08 00:00:00 · I (O)
2009-08-20 00:00:00 · Z (O)

More inspections in this industry (NAICS 326199)

Jul 30, 2026 Core Molding Technologies, INC. · COLUMBUS, OH Jul 30, 2026 Hanwha Azdel, INC. · FOREST, VA Jul 29, 2026 Valencia Pipe Company · YERINGTON, NV Jul 28, 2026 Manar, INC. · LAFAYETTE, TN Jul 28, 2026 Misitano Guilio · EAST LONGMEADOW, MA

More inspections in AL

Jul 30, 2026 Juan COC · DAPHNE, AL Jul 28, 2026 Addison Fabricators, INC · ADDISON, AL Jul 28, 2026 Dellner Hydratech USA, INC. · ROBERTSDALE, AL Jul 24, 2026 FMV Services, LLC. · MOBILE, AL Jul 23, 2026 Vulcan Fabricated Metals, INC. · HOMEWOOD, AL

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 312933252.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.