BRONX, NY ·
OSHA Inspection: ZEREGA COLD STORAGE CORP.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ZEREGA COLD STORAGE CORP. in 701 ZEREGA AVENUE, BRONX, NY 10473 (NAICS 493120). OSHA activity number 313005092.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ZEREGA COLD STORAGE CORP.
- Site address
- 701 ZEREGA AVENUE
- City
- BRONX
- State
- NY
- ZIP
- 10473
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 493120
- SIC code (legacy)
- 4222
- Employees
- 30
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 22, 2011
- Abate by
- Feb 25, 2011
- Penalty
- Initial $2,975 · Current $1,560 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of getting parts of their body caught between fixed structures and a dock leveling device: Location: 701 Zerega Ave Bronx, NY 10473 On or about 10/5/10, a) A dock leveling device's side guards did not extend the full operating range of its platform travel. Among other methods, one feasible and acceptable abatement method to correct the hazard is to follow ANSI Standard MH30.1-2000 section 4.3.2 which states "A smooth-faced toe guard shall be provided on the sides of the dock leveling device through the full recess length for the full operating range of platform travel. A toe guard shall also be provided for the rear edge of the dock leveling device if the edge is vertically movable. The guards shall be rigid enough to restrict placement of a foot under the platform. NOTE: Because abatement of this violation is already documented in the inspection case file, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (2)
- · I (S) $1560.00
- · Z (S) $2975.00
1910.303 B07 IV
- Issued
- Feb 22, 2011
- Abate by
- Feb 25, 2011
- Penalty
- Initial $2,975 · Current $1,560 Reduced
Recent events (2)
- · I (S) $1560.00
- · Z (S) $2975.00
1910.303 C03 I
- Issued
- Feb 22, 2011
- Abate by
- Feb 25, 2011
- Penalty
- Initial $2,380 · Current $1,560 Reduced
Recent events (2)
- · I (S) $1560.00
- · Z (S) $2380.00
1910.303 F02
- Issued
- Feb 22, 2011
- Abate by
- Feb 25, 2011
- Penalty
- Initial $2,380 · Current $1,560 Reduced
Recent events (2)
- · I (S) $1560.00
- · Z (S) $2380.00
1910.305 J02 VI
- Issued
- Feb 22, 2011
- Abate by
- Feb 25, 2011
- Penalty
- Initial $2,380 · Current $1,560 Reduced
Recent events (2)
- · I (S) $1560.00
- · Z (S) $2380.00
More inspections at Zerega Cold Storage Corp.
View Zerega Cold Storage Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 493120)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 313005092.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.