SCHAUMBURG, IL —
OSHA Inspection: LAIRD TECHNOLOGIES
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LAIRD TECHNOLOGIES in 1751 WILKENING CT., SCHAUMBURG, IL 60173 (NAICS 339113). OSHA activity number 313423824.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LAIRD TECHNOLOGIES
- Site address
- 1751 WILKENING CT.
- City
- SCHAUMBURG
- State
- IL
- ZIP
- 60173
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339113
- SIC code (legacy)
- 3089
- Employees
- 171
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 27, 2009
- Abate by
- Sep 30, 2009
- Penalty
- Initial $1,875 · Current $1,125 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Tool Room - Provision was not made to prevent the Roll - In vertical band saw model #EF 459, serial #000 51EF, from automatically restarting upon restoration of power after a power source failure. Among others methods, one feasible and acceptable means of abatement in an event of interruption in the electrical supply to the saw would be to provide an electrical device that is designed to prevent the saw from restarting automatically when power is restored, such as a magnetic restart or similar device as prescribed by the American National Standard Institute for Metal Sawing Machines, ANSI B11.10-2003, Section 6.11. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.22 A01
- Issued
- Aug 27, 2009
- Abate by
- Sep 1, 2009
- Penalty
- Initial $1,125 · Current $675 Reduced
Recent events (2)
- — I (S) $675.00
- — Z (S) $1125.00
1910.305 G01 III
- Issued
- Aug 27, 2009
- Abate by
- Sep 1, 2009
1910.147 C04 I
- Issued
- Aug 27, 2009
- Abate by
- Oct 30, 2009
- Penalty
- Initial $1,875 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.147 C06 I
- Issued
- Aug 27, 2009
- Abate by
- Oct 30, 2009
- Penalty
- Initial $1,875 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.147 C07 I
- Issued
- Aug 27, 2009
- Abate by
- Oct 30, 2009
- Penalty
- Initial $1,875 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.178 L04 IIB
- Issued
- Aug 27, 2009
- Abate by
- Sep 1, 2009
- Penalty
- Initial $1,875 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.212 A01
- Issued
- Aug 27, 2009
- Abate by
- Sep 16, 2009
- Penalty
- Initial $1,875 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $1875.00
1910.217 E01 I
- Issued
- Aug 27, 2009
- Abate by
- Sep 30, 2009
- Penalty
- Initial $1,875 · Current $1,100 Reduced
Recent events (2)
- — I (S) $1100.00
- — Z (S) $1875.00
1910.242 B
- Issued
- Aug 27, 2009
- Abate by
- Sep 30, 2009
- Penalty
- Initial $1,500 · Current $900 Reduced
Recent events (2)
- — I (S) $900.00
- — Z (S) $1500.00
1910.303 B02
- Issued
- Aug 27, 2009
- Abate by
- Sep 30, 2009
- Penalty
- Initial $1,125 · Current $675 Reduced
Recent events (2)
- — I (S) $675.00
- — Z (S) $1125.00
1910.305 A02 I
- Issued
- Aug 27, 2009
- Abate by
- Sep 1, 2009
- Penalty
- Initial $1,500 · Current $900 Reduced
Recent events (2)
- — I (S) $900.00
- — Z (S) $1500.00
More inspections at Laird Technologies
View Laird Technologies's full OSHA safety record →
More inspections in this industry (NAICS 339113)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313423824.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.