LAS VEGAS, NV —
OSHA Inspection: SILVER STATE ORNAMENTAL IRON
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SILVER STATE ORNAMENTAL IRON in 1327 H STREET, LAS VEGAS, NV 89106 (NAICS 238120). OSHA activity number 313445637.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SILVER STATE ORNAMENTAL IRON
- Site address
- 1327 H STREET
- City
- LAS VEGAS
- State
- NV
- ZIP
- 89106
- Mailing
- 3625 POLARIS AVENUE, LAS VEGAS, NV 89103
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- SIC code (legacy)
- 1791
- Employees
- 6
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
3 citations on file for this inspection.
618037501
- Issued
- Jan 12, 2010
- Abate by
- Feb 4, 2010
- Penalty
- Initial $2,500 · Current $2,500
General-duty citation text
Nevada Revised Statute 618.375(1): Duties of employers. The employer failed to furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to his employees: The employer failed to ensure personnel were elevated safely, as follows: a.At the Sarann Knight Apartments construction site, northeast exterior stairwell, steel stairwell construction activities, employees were exposed to 24 and 12 foot falls while working from a personnel platform that was not securely attached to the lifting carriage or forks of a rough terrain forklift. The employer was elevating the employees on two separate occasions. On the first instance, the personnel platform was occupied by two employees while it was elevated to 24 feet above ground. The platform was being elevated by the endpockets of the platform, which were to be used for transportation loading only, as was stated on a decal located on the platform. By placing the forks into the endpockets rather than the attach pockets designated by the manufacturer, the platform's chains and pins could not be used to attach the platform securely to the forklift's lifting carriage or forks. Five days later, two employees were exposed to a 12 foot fall while working from the same platform attached to the same forklift in the same manner. Reference: ASME (American Society of Mechanical Engineers) B56.6-1992 Safety Standard for Rough Terrain Forklift Trucks Section 5.15, Paragraph (b) Elevating Personnel: Be certain that the platform is securely attached to the lifting carriage or forks. One feasible means of abatement is to ensure forklift operators read all safety manuals and decals pertaining to rough terrain forklift attachments prior to their use. b.At the Sarann Knight Apartments construction site, steel stairwell construction activities, employees were exposed to a 12 foot fall while working from a personnel platform elevated by a rough terrain forklift whose operating position had been abandoned by the forklift operator. The operator had walked off with his back turned to the forklift and elevated workers without blocking the wheels of his forklift. In addition, the front end of the forklift had been parked on a berm, or raised barrier that caused the forklift to rest on a slope, which created the potential for the forklift to roll backwards while the platform was occupied by workers. Reference: ASME (American Society of Mechanical Engineers) B56.6-1992 Safety Standard for Rough Terrain Forklift Trucks Section 5.15, Paragraph (s) Elevating Personnel: A trained operator shall be in position to control the rough terrain forklift truck or available to operate controls if the platform is not equipped with controls. When the operator is not in the operating position, block the truck wheels and apply the parking brake with all travel controls in neutral. One feasible means of abatement is to ensure the forklift operator successfully completes a refresher training course in rough terrain forklift safety.
1926.404 F06
- Issued
- Jan 12, 2010
- Abate by
- Jan 15, 2010
- Penalty
- Initial $875 · Current $875
1926.502 D17
- Issued
- Jan 12, 2010
- Abate by
- Jan 15, 2010
- Penalty
- Initial $875 · Current $875
More inspections at Silver State Ornamental Iron
View Silver State Ornamental Iron's full OSHA safety record →
More inspections in this industry (NAICS 238120)
More inspections in NV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313445637.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.