GRAFTON, WI —
OSHA Inspection: PACE INDUSTRIES GRAFTON DIVISION
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of PACE INDUSTRIES GRAFTON DIVISION in 1600 7TH AVE., GRAFTON, WI 53024 (NAICS 331521). OSHA activity number 313527202.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PACE INDUSTRIES GRAFTON DIVISION
- Site address
- 1600 7TH AVE.
- City
- GRAFTON
- State
- WI
- ZIP
- 53024
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331521
- SIC code (legacy)
- 3363
- Employees
- 406
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 13, 2010
- Abate by
- Jan 30, 2011
- Penalty
- Initial $1,875 · Current $1,313 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards of combustible aluminum dust that were causing or likely to cause death or serious physical harm to employees in that: (a)In the Harley Davidson Value Stream wheelabrator area a dust collector, which collected dust from the wheelabrator finishing of aluminum castings, was located inside the building, potentially exposing workers to the hazards of fire and/or explosion. (b)In the Small Engine Value Stream wheelabrator area a dust collector, which collected dust from the wheelabrator finishing of aluminum castings, was located inside the building, potentially exposing workers to the hazards of fire and/or explosion. ABATEMENT NOTE: Among other methods, one feasible and acceptable method to correct these hazards is to comply with the National Fire Protection Association (NFPA) 484 "Standard for Combustible Metals" (2006 Edition) as it applies to your operations and equipment including but not limited to the following: Locate dry-type aluminum dust collectors outside of buildings (as per section 6.3.2.5 of NFPA 484). Certification, with date and method of abatement required. Certification of abatement is required by 29 CFR Part 1903 and is to be submitted within ten (10) calendar days after the abatement date.ment
Recent events (2)
- — I (S) $1312.50
- — Z (S) $1875.00
1910.22 A01
- Issued
- Aug 13, 2010
- Abate by
- Aug 18, 2010
- Penalty
- Initial $1,125 · Current $788 Reduced
Recent events (2)
- — I (S) $787.50
- — Z (S) $1125.00
1910.38 F01
- Issued
- Aug 13, 2010
- Abate by
- Aug 31, 2010
- Penalty
- Initial $1,875 · Current $1,313 Reduced
Recent events (2)
- — I (S) $1312.50
- — Z (S) $1875.00
1910.157 G04
- Issued
- Aug 13, 2010
- Abate by
- Aug 19, 2010
- Penalty
- Initial $1,125 · Current $788 Reduced
Recent events (2)
- — I (S) $787.50
- — Z (S) $1125.00
1910.178 P01
- Issued
- Aug 13, 2010
- Abate by
- Apr 22, 2010
- Penalty
- Initial $956 · Current $669 Reduced
Recent events (2)
- — I (S) $669.20
- — Z (S) $956.00
1910.212 A01
- Issued
- Aug 13, 2010
- Abate by
- Aug 18, 2010
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1904.32 B02
- Issued
- Aug 13, 2010
- Abate by
- Sep 15, 2010
Recent events (2)
- — I (O)
- — Z (O)
1910.22 B01
- Issued
- Aug 13, 2010
- Abate by
- Aug 18, 2010
Recent events (2)
- — I (O)
- — Z (O)
1910.303 B02
- Issued
- Aug 13, 2010
- Abate by
- Aug 18, 2010
Recent events (2)
- — I (O)
- — Z (O)
1910.305 B01 I
- Issued
- Aug 13, 2010
- Abate by
- Aug 18, 2010
Recent events (2)
- — I (O)
- — Z (O)
1910.1048 D01 I
- Issued
- Aug 13, 2010
- Abate by
- Aug 18, 2010
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 H03 II
- Issued
- Aug 13, 2010
- Abate by
- Sep 15, 2010
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Pace Industries Grafton Division
View Pace Industries Grafton Division's full OSHA safety record →
More inspections in this industry (NAICS 331521)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313527202.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.