FRANKLIN, WI —
OSHA Inspection: CREATIVE WOOD PRODUCTS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of CREATIVE WOOD PRODUCTS, INC. in 9710 S. 58TH ST., FRANKLIN, WI 53132 (NAICS 337110). OSHA activity number 313527467.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CREATIVE WOOD PRODUCTS, INC.
- Site address
- 9710 S. 58TH ST.
- City
- FRANKLIN
- State
- WI
- ZIP
- 53132
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- SIC code (legacy)
- 2434
- Employees
- 7
- Ownership type
- A
Citations
20 citations on file for this inspection.
1910.1048 D02
- Issued
- Jun 11, 2010
- Abate by
- Jul 7, 2010
- Penalty
- Initial $600 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $600.00
1910.1048 L01 I
- Issued
- Jun 11, 2010
- Abate by
- Sep 15, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.1048 N01
- Issued
- Jun 11, 2010
- Abate by
- Aug 30, 2010
Recent events (2)
- — I (S)
- — Z (S)
5(a)(1)
- Issued
- Jun 4, 2010
- Abate by
- Jun 30, 2010
- Penalty
- Initial $1,050 · Current $1,050
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to wood dust explosion, deflagration or other fire hazards: (a)The Murphy-Rodgers, Inc. cyclone/dust collector, located outside the building, had no explosion protection. (b)There were no means to prevent an explosion/fire inside the cyclone/dust collector from traveling fore and aft, back into the building. (c)There was no means to prevent tramp metal from entering the cyclone/dust collector. (d)Compressed air was used to clean wood dust when electrical power or other sources of ignition were present. NOTE - you can use compressed air if proper precautions are taken. (see NFPA 664-11.2.1.1) Feasible abatement methods include complying with NFPA 664 Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities, such as but not limited to: (1) installing deflagration vents on the dust collector, (2) installing deflagration isolation systems such as spark detectors and abort gates on the dust collector ducts that leave and enter the building, and (3) installing devices such as magnets to prevent tramp metal from entering the dust collection system. Certification, with date and method of abatement required. Certification of abatement is required by 29 CFR Part 1903 and is to be submitted within ten (10) calendar days after the abatement date.ment
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1050.00
1910.22 A01
- Issued
- Jun 4, 2010
- Abate by
- Jun 22, 2010
- Penalty
- Initial $1,050 · Current $1,050
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1050.00
1910.107 B02
- Issued
- Jun 4, 2010
- Abate by
- Aug 15, 2010
- Penalty
- Initial $450 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $450.00
1910.107 G02
- Issued
- Jun 4, 2010
- Abate by
- Aug 15, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.107 G03
- Issued
- Jun 4, 2010
- Abate by
- Jun 9, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.134 C01
- Issued
- Jun 4, 2010
- Abate by
- Sep 15, 2010
- Penalty
- Initial $600 · Current $250 Reduced
Recent events (2)
- — I (S) $250.00
- — Z (S) $600.00
1910.134 C02 I
- Issued
- Jun 4, 2010
- Abate by
- Jul 15, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C01
- Issued
- Jun 4, 2010
- Abate by
- Aug 15, 2010
- Penalty
- Initial $1,050 · Current $250 Reduced
Recent events (2)
- — I (S) $250.00
- — Z (S) $1050.00
1910.147 C04 I
- Issued
- Jun 4, 2010
- Abate by
- Aug 15, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C05 I
- Issued
- Jun 4, 2010
- Abate by
- Jul 15, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C07 I
- Issued
- Jun 4, 2010
- Abate by
- Aug 30, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.178 L04 III
- Issued
- Jun 4, 2010
- Abate by
- Jul 15, 2010
- Penalty
- Initial $450
Recent events (2)
- — I (O)
- — Z (S) $450.00
1910.1200 E01
- Issued
- Jun 4, 2010
- Abate by
- Aug 15, 2010
- Penalty
- Initial $1,050 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $1050.00
1910.1200 G01
- Issued
- Jun 4, 2010
- Abate by
- Aug 15, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 H01
- Issued
- Jun 4, 2010
- Abate by
- Aug 30, 2010
Recent events (2)
- — I (S)
- — Z (S)
5(a)(1)
- Issued
- Jun 4, 2010
- Abate by
- Apr 29, 2011
- Penalty
- Initial $1,050 · Current $700 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to wood dust explosion, deflagration or other fire hazards: (a)The Murphy-Rodgers, Inc. cyclone/dust collector, located outside the building, had no explosion protection. (b)There were no means to prevent an explosion/fire inside the cyclone/dust collector from traveling fore and aft, back into the building. (c)There was no means to prevent tramp metal from entering the cyclone/dust collector. (d)Compressed air was used to clean wood dust when electrical power or other sources of ignition were present. NOTE - you can use compressed air if proper precautions are taken. (see NFPA 664-11.2.1.1) Feasible abatement methods include complying with NFPA 664 Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities, such as but not limited to: (1) installing deflagration vents on the dust collector, (2) installing deflagration isolation systems such as spark detectors and abort gates on the dust collector ducts that leave and enter the building, and (3) installing devices such as magnets to prevent tramp metal from entering the dust collection system. Certification, with date and method of abatement required. Certification of abatement is required by 29 CFR Part 1903 and is to be submitted within ten (10) calendar days after the abatement date.ment
Recent events (3)
- — P (S) $700.00
- — I (S) $700.00
- — Z (S) $1050.00
1910.22 A01
- Issued
- Jun 4, 2010
- Abate by
- Jul 30, 2010
- Penalty
- Initial $1,050
Recent events (2)
- — I (S)
- — Z (S) $1050.00
More inspections at Creative Wood Products, INC.
View Creative Wood Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313527467.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.