Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: DIC IMAGING PRODUCTS USA, LLC

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of DIC IMAGING PRODUCTS USA, LLC in 7300 S. 10TH STREET, OAK CREEK, WI 53154 (NAICS 325910). OSHA activity number 313530024.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch DIC Imaging Products USA, LLC for free Get an email when a new federal OSHA severe-injury report for DIC Imaging Products USA, LLC is published. One employer, no account, unsubscribe in one click.
Site address
7300 S. 10TH STREET
City
OAK CREEK
State
WI
ZIP
53154
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325910
SIC code (legacy)
2893
Employees
88
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 88 exposed
Issued
Nov 10, 2010
Abate by
Dec 19, 2011
Penalty
Initial $4,000 · Current $3,500 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not furnish
employment and a place of employment which were free from recognized
hazards that were
causing or likely to cause death or serious physical harm to employees in
that employees were
exposed to dust explosion, deflagration, or other fire hazards:
(a)The SLY STJ tube jet dust collector, plant identification number
DC-A201, serial
number JK6-9281 had no means to prevent an explosion or fire inside the
dust
collector from traveling back into the work place.
(b)The Thyssen Henschel Kassel fluid mixer, plant identification number
MX-C102,
model number FM500H, serial number A04411, had no explosion protection.
(c)The Thyssen Henschel Kassel fluid mixer, plant identification number
MX-C102,
model number FM500H, serial number A04411, had no deflagration isolation
between it and the SLY STJ tube jet dust collector.
Feasible abatement methods include complying with NFPA 654 Standard for
the Prevention of
Fire and Dust Explosions from the Manufacturing, Processing, and Handling
of Combustible
Particulate Solids, such as but not limited to:  (1) installing
fast-acting valve systems or flame
front diverters on the ducts from the work areas to the dust collector,
(2) installing deflagration
venting on the mixer, and (3) installing fast-acting valves or flame front
diverters on the duct
between the mixer and the dust collector.
Certification, and documentation/evidence of abatement is required.
Certification of abatement is required by 29 CFR Part 1903 and is to be
submitted within ten (10)
calendar days after the abatement date.ment
Recent events (3)
  • · P (S) $3500.00
  • · I (S) $3500.00
  • · Z (S) $4000.00

1910.38 C03

Other-than-serious Gravity 05 1 instance 2 exposed
Issued
Nov 10, 2010
Abate by
Nov 22, 2010
Penalty
Initial $2,800
Recent events (2)
  • · I (O)
  • · Z (S) $2800.00

1910.132 D01 I

Serious Gravity 05 1 instance 88 exposed
Issued
Nov 10, 2010
Abate by
Aug 31, 2011
Penalty
Initial $2,800 · Current $1,500 Reduced
Recent events (3)
  • · P (S) $1500.00
  • · I (S) $1500.00
  • · Z (S) $2800.00

1910.1200 H01

Other-than-serious Gravity 05 1 instance 1 exposed
Issued
Nov 10, 2010
Abate by
Nov 22, 2010
Penalty
Initial $1,600
Recent events (2)
  • · I (O)
  • · Z (S) $1600.00

1910.1200 G02 XII

Other-than-serious Gravity 01 2 instances 88 exposed
Issued
Nov 10, 2010
Abate by
Nov 28, 2010
Recent events (2)
  • · I (O)
  • · Z (O)

View DIC Imaging Products USA, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313530024.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.