GREENSBORO, NC ·
OSHA Inspection: TIRE KINGDOM,INC DBA MERCHANTS TIRE & AUTO CTR 337
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TIRE KINGDOM,INC DBA MERCHANTS TIRE & AUTO CTR 337 in 105 COLLEGE RD, GREENSBORO, NC 27410 (NAICS 441320). OSHA activity number 313604555.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TIRE KINGDOM,INC DBA MERCHANTS TIRE & AUTO CTR 337
- Site address
- 105 COLLEGE RD
- City
- GREENSBORO
- State
- NC
- ZIP
- 27410
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441320
- SIC code (legacy)
- 5531
- Employees
- 10
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
14 citations on file for this inspection.
95012901
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $63,000 · Current $41,000 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to being struck by or crushed by automotive lifts: a)establishment, maintenance bay 2 - Rotary automotive lift, 9, 000 lbs capacity, SN P96B0059, was not maintained in a safe operating condition. Telescoping stops on the short swing arm on the left side were nonoperational. The arm came completely out of the lift system. The pads on the swing arms were not equipped with locking pins which allowed the pads to come apart and fall off the lift system. The swing arms were welded into place preventing proper locking. b)establishment, maintenance bay 3 - Rotary automotive lift, 9,000 lbs capacity, motor SN 41047, was not maintained in a safe operating condition. Long and short swing arms on both sides came completely out of the lift system. The swing arms were welded into place preventing proper locking. c)establishment, maintenance bay 4 - Rotary automotive lift, 9,000 lbs capacity, motor SN 41046, was not maintained in a safe operating condition. The short swing arm on the left side came completely out of the lift system. The swing arms were welded into place preventing proper locking. d)establishment, maintenance bay 5 - Rotary automotive lift, 9,000 lbs capacity, motor SN 41045, was not maintained in a safe operating condition. The short swing arm on the right side came completely out of the lift system. The swing arms were welded into place preventing proper locking. e)establishment, maintenance bay 6 - Hunter alignment lift, no serial number, was not marked with the maximum weight capacity. f)establishment, maintenance bay 1-5 - Rotary automotive lift had been altered without manufacturers' approval. The arms had been welded at the pivot point next to the posts. Tire Kingdom, Inc dba Merchants Tire & Auto Center was previously cited for a violation of this Occupational Safety and Health (OSH) standard (NCGS 95.129(1)) or its equivalent standard, which was contained in the OSH inspection number 311336887, Citation number 1, Item/Group number 1, issued on 08/22/2007. The final order date for this citation regarding automotive lifts was 09/25/07. Tire Kingdom, Inc dba Merchants Tire & Auto Center was previously cited for a violation of this Occupational Safety and Health (OSH) standard (NCGS 95.129(1)) or its equivalent standard, which was contained in the OSH inspection number 311941991, Citation 1, Item/Group number 1 issued on 08/28/2008. The final order date for this citation regarding automotive lifts was 10/20/08. Tire Kingdom, Inc dba Merchants Tire & Auto Center was previously cited for a violation of this Occupational Safety and Health (OSH) standard (NCGS 95.129(1)) or its equivalent standard, which was contained in the OSH inspection number 313597601, Citation 1, Item/Group number 1, issued on 10/05/2009. The final order date for this citation regarding automotive lifts was 12/02/09. Reference: ANSI/ALI ALOIM-2000; paragraphs: 4-4.6 - Operations 5-5.6.6 - Periodic Qualified Inspection 6-6.2.5 - Maintenance ABATEMENT NOTE: Among other methods, one feasible and acceptable abatement method to correct this hazard is to provide operator training, conduct periodic inspections and perform maintenance procedures.
Recent events (2)
- · I (R) $41000.00
- · Z (R) $63000.00
1910.151 C
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $22,500 · Current $14,000 Reduced
Recent events (2)
- · I (R) $14000.00
- · Z (R) $22500.00
1910.215 A04
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $5,400 · Current $3,200 Reduced
Recent events (2)
- · I (R) $3200.00
- · Z (R) $5400.00
1910.303 B02
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $140 · Current $100 Reduced
Recent events (2)
- · I (R) $100.00
- · Z (R) $140.00
95012901
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $4,900 · Current $3,500 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to being struck by the door panels, brackets, springs and rollers when opening or closing garage doors: a)establishment, maintenance bay 5 & 6 - bay garage doors were not maintained in a safe operating condition in that the panels were broken and bent, roller brackets were broken, and the spring retractor was pulled loose from the wall mount. ABATEMENT NOTE: Among other methods, one feasible and acceptable abatement method to correct this hazard is to repair or replace the door.
Recent events (2)
- · I (S) $3500.00
- · Z (S) $4900.00
95012901
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $2,100 · Current $1,500 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to being struck by a compressed metal spring/strut spring: a)establishment, maintenance bay by Hunter alignment lift - Branick MacPherson strut spring compressor, SN MST580A, was not maintained in a safe operating condition. The bottom tension keepers would not maintain compression which allowed the spring to slip/bow out toward the operator. ABATEMENT NOTE: Among other methods, one feasible and acceptable abatement method to correct this hazard is to repair the compressor so that the spring is retained so as not to create a hazard.
Recent events (2)
- · I (S) $1500.00
- · Z (S) $2100.00
1910.145 F03
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $3,500 · Current $2,500 Reduced
Recent events (2)
- · I (S) $2500.00
- · Z (S) $3500.00
1910.147 C05 I
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $2,100 · Current $1,300 Reduced
Recent events (2)
- · I (S) $1300.00
- · Z (S) $2100.00
1910.212 A01
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $2,100 · Current $1,300 Reduced
Recent events (2)
- · I (S) $1300.00
- · Z (S) $2100.00
1910.212 B
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $2,100 · Current $1,300 Reduced
Recent events (2)
- · I (S) $1300.00
- · Z (S) $2100.00
1910.215 B09
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $2,100 · Current $1,300 Reduced
Recent events (2)
- · I (S) $1300.00
- · Z (S) $2100.00
1910.305 B01
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $3,500 · Current $2,000 Reduced
Recent events (2)
- · I (S) $2000.00
- · Z (S) $3500.00
1910.305 B02
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
- Penalty
- Initial $3,500 · Current $2,000 Reduced
Recent events (2)
- · I (S) $2000.00
- · Z (S) $3500.00
1910.305 G02 II
- Issued
- Apr 27, 2010
- Abate by
- Apr 30, 2010
More inspections in this industry (NAICS 441320)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313604555.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.