BROOKLYN, NY —
OSHA Inspection: CONEY ISLAND AUTO PARTS UNLIMITED INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CONEY ISLAND AUTO PARTS UNLIMITED INC. in 2317 MCDONALD AVENUE, BROOKLYN, NY 11223 (NAICS 423120). OSHA activity number 313699118.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONEY ISLAND AUTO PARTS UNLIMITED INC.
- Site address
- 2317 MCDONALD AVENUE
- City
- BROOKLYN
- State
- NY
- ZIP
- 11223
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423120
- SIC code (legacy)
- 5013
- Employees
- 100
- Ownership type
- A
Citations
11 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 5, 2010
- Abate by
- Jan 25, 2010
- Penalty
- Initial $1,250 · Current $800 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to caught by moving conveyor belts: a)Stairwell: Employees who used a belt conveyor to move merchandise between floors 1 and 2 of the establishment were exposed to being caught by the moving conveyor belt. The conveyor was not provided with stop devices at the upper and lower ends of the conveyor where employees are normally stationed. On or about 9/15/09. Abatement Note Among others, a feasible method to eliminate or materially reduce this hazard is to comply with ASME B20.1-2003, Section 6.1.2 and provide permanently installed pull cords or similar stop controllers at points where employees are normally stationed. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT CERTIFICATION OF ABATEMENT FOR THIS ITEM. FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $800.00
- — Z (S) $1250.00
1910.37 B02
- Issued
- Jan 5, 2010
- Abate by
- Jan 15, 2010
- Penalty
- Initial $1,250 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1250.00
1910.37 B04
- Issued
- Jan 5, 2010
- Abate by
- Jan 15, 2010
- Penalty
- Initial $1,250 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1250.00
1910.157 G01
- Issued
- Jan 5, 2010
- Abate by
- Jan 25, 2010
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.305 B01 II
- Issued
- Jan 5, 2010
- Abate by
- Jan 15, 2010
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1000.00
1910.305 G01 IIIC
- Issued
- Jan 5, 2010
- Abate by
- Jan 15, 2010
- Penalty
- Initial $1,250 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1250.00
1904.29 A
- Issued
- Jan 5, 2010
- Abate by
- Jan 25, 2010
- Penalty
- Initial $500
Recent events (2)
- — I (O)
- — Z (O) $500.00
1904.29 B01
- Issued
- Jan 5, 2010
- Abate by
- Jan 25, 2010
Recent events (2)
- — I (O)
- — Z (O)
1904.32 B02
- Issued
- Jan 5, 2010
- Abate by
- Jan 25, 2010
Recent events (2)
- — I (O)
- — Z (O)
1904.32 B02
- Issued
- Jan 5, 2010
- Abate by
- Jan 25, 2010
Recent events (2)
- — I (O)
- — Z (O)
1910.132 D02
- Issued
- Jan 5, 2010
- Abate by
- Jan 25, 2010
Recent events (2)
- — I (O)
- — Z (O)
More inspections in this industry (NAICS 423120)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313699118.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.