Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LUCAS OIL PRODUCTION STUDIOS

Accident-driven inspection · Safety discipline

On , OSHA opened an accident-driven safety inspection of LUCAS OIL PRODUCTION STUDIOS in 701 S ROONEY RD, LAKEWOOD, CO 80401 (NAICS 512110). OSHA activity number 313720591.

Watch Lucas OIL Production Studios — free Get an email when a new federal OSHA severe-injury report for Lucas OIL Production Studios is published. One employer, no account, unsubscribe in one click.
Site address
701 S ROONEY RD
City
LAKEWOOD
State
CO
ZIP
80401
Mailing
302 N. SHERIDAN ST., CORONA, CA 92880
Inspection type
Accident-driven (A)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
512110
SIC code (legacy)
7812
Employees
42
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 12 instances 15 exposed
Issued
Dec 13, 2010
Abate by
Jan 6, 2011
Penalty
Initial $7,000 · Current $7,000
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not furnish
employment and a place of employment which was free from recognized
hazards which were
likely to cause death or serious physical harm to employees in that
employees were directed to
use, maintain and operate self-propelled elevating work platforms without
adequate training:
a)  On or about June 25, 2010, and at times prior, Lucas Oil Products,
Inc. dba
Lucas Oil Production Studios HD, failed to instruct employees at the
Thunder
Valley Motocross Racetrack at 701 South Rooney Road in Lakewood, Colorado
to properly use, maintain and operate various models of self-propelled
scissor
lifts.  This includes the SkyJack 7127 rough terrain scissor lift equipped
with a
self-leveling outrigger system from which an employee fell to his death.
1. Employees were not trained to recognize and avoid improper
site positioning.
2. Employees were not trained in the proper use of the outrigger
system including deployment, troubleshooting, and recognition of
and proper response to warning signals.
3. Employees were not trained in the basic understanding of proper
inspection, maintenance and operation.
4. Employees were not trained to recognize and avoid fall hazards
while on the lifts.
Among other methods, one feasible and acceptable abatement method to
correct this hazard is:
Develop a program, to be implemented as part of the company safety
program, which addresses
the training, certification, and company enforcement of proper use,
maintenance and operation
of self-propelled elevating work platforms and to ensure that
manufacturer's guidelines
addressing training and use are followed.
Abatement Note:  Abatement certification and documentation are required
for this item (see
enclosed "Sample Abatement-Certification Letter").
Recent events (2)
  • — F (S) $7000.00
  • — Z (S) $7000.00

1910.147 C01

Serious Gravity 10 1 instance 7 exposed
Issued
Dec 13, 2010
Abate by
Dec 30, 2010
Penalty
Initial $7,000 · Current $7,000
Recent events (2)
  • — F (S) $7000.00
  • — Z (S) $7000.00

5(a)(1)

Serious Gravity 10 10 instances 8 exposed
Issued
Dec 13, 2010
Abate by
Dec 16, 2010
Penalty
Initial $70,000 · Current $39,000 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not
furnish employment and a place of employment which was free from
recognized hazards
which were likely to cause death or serious physical harm to employees in
that employees
were exposed to fall hazards:
a)  On or about June 25, 2010, and at times prior, Lucas Oil Products
Inc., dba
Lucas Oil Production Studios HD did not ensure that employees at the
Thunder
Valley Motocross Racetrack at 701 South Rooney Road in Lakewood, Colorado
were
protected from fall hazards.
1.  The employer directed utility employees to remove guardrails from ten
scissor lifts at the Thunder Valley Motocross Racetrack at 701 South Rooney
Road in Lakewood, Colorado.   Eight camera operators and technicians were
directed to work from the unguarded scissor lift platforms.  The work that
was
being conducted included the removal of rails, and the set up of the
cameras.
The unguarded scissor lifts were used at heights from 6 to 27 feet.
Among other methods, one feasible and acceptable abatement method to
correct this hazard
is:  Follow the manufacturer's specifications to only use the aerial
platform with all
guardrails in place.
Abatement Note:  Abatement certification and documentation are required
for this item
(see enclosed "Sample Abatement-Certification Letter").
Recent events (2)
  • — F (S) $39000.00
  • — Z (W) $70000.00

1904.39 A

Other-than-serious Gravity 00 1 instance 2 exposed
Issued
Dec 13, 2010
Abate by
Dec 17, 2010
Penalty
Initial $7,000 · Current $7,000
Recent events (2)
  • — F (O) $7000.00
  • — Z (O) $7000.00

View Lucas OIL Production Studios's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313720591.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.