SELMA, AL ·
OSHA Inspection: HANIL E HWA INTERIOR SYSTEMS ALABAMA, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HANIL E HWA INTERIOR SYSTEMS ALABAMA, LLC in 200 INDUSTIAL DRIVE, SELMA, AL 36701 (NAICS 336111). OSHA activity number 313735664.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HANIL E HWA INTERIOR SYSTEMS ALABAMA, LLC
- Site address
- 200 INDUSTIAL DRIVE
- City
- SELMA
- State
- AL
- ZIP
- 36701
- Mailing
- 200 INDUSTRIAL DRIVE, SELMA, AL 36701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336111
- SIC code (legacy)
- 3711
- Employees
- 187
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 3, 2010
- Abate by
- Feb 16, 2010
- Penalty
- Initial $1,750 · Current $1,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by and crushing hazards while operating overhead cranes where the hook was not equipped with a safety latch: a)In the fabricating section of the plant: On August 4, 2009 and at times prior to, employees were exposed to struck-by and crushing hazards while operating overhead, under-hung cranes in that loads lifted by the cranes were not secured by a safety latch. The device had been removed or damaged. In Accordance With (IAW) industry standards published by the American Society of Mechanical Engineers (ASME), B30.10, states that a hook with an inoperative hook latch is considered inoperative unless it is repaired or replaced. IAW ASME B30.16, "Hooks shall be equipped with latches unless the use of a latch creates a hazardous condition." Feasible and acceptable methods of abatement to correct this hazard include, but are not limited to following: a)Procure and attach a crane hook with an operable latch. b)Repair the current hooks by having a latch attached.
Recent events (2)
- · I (S) $1500.00
- · Z (S) $1750.00
1910.147 C07 IA
- Issued
- Feb 3, 2010
- Abate by
- Mar 2, 2010
- Penalty
- Initial $3,500 · Current $1,685 Reduced
Recent events (2)
- · I (S) $1685.00
- · Z (S) $3500.00
1910.151 C
- Issued
- Feb 3, 2010
- Abate by
- Feb 23, 2010
- Penalty
- Initial $1,750 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $1750.00
1910.215 A04
- Issued
- Feb 3, 2010
- Abate by
- Feb 11, 2010
- Penalty
- Initial $1,050 · Current $900 Reduced
Recent events (2)
- · I (S) $900.00
- · Z (S) $1050.00
1910.215 B09
- Issued
- Feb 3, 2010
- Abate by
- Feb 11, 2010
Recent events (2)
- · I (S)
- · Z (S)
1904.29 B01
- Issued
- Feb 3, 2010
- Abate by
- Feb 16, 2010
- Penalty
- Initial $2,100 · Current $1,500 Reduced
Recent events (2)
- · I (O) $1500.00
- · Z (O) $2100.00
1904.32 B03
- Issued
- Feb 3, 2010
- Abate by
- Feb 16, 2010
- Penalty
- Initial $1,400 · Current $1,000 Reduced
Recent events (2)
- · I (O) $1000.00
- · Z (O) $1400.00
1910.37 A03
- Issued
- Feb 3, 2010
- Abate by
- Feb 11, 2010
Recent events (2)
- · I (O)
- · Z (O)
1910.179 B05
- Issued
- Feb 3, 2010
- Abate by
- Feb 23, 2010
Recent events (2)
- · I (O)
- · Z (O)
1910.184 E01
- Issued
- Feb 3, 2010
- Abate by
- Feb 23, 2010
Recent events (2)
- · I (O)
- · Z (O)
More inspections in this industry (NAICS 336111)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 313735664.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.