KETTERING, OH ·
OSHA Inspection: CONSOLIDATED VEHICLE CONVERTERS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CONSOLIDATED VEHICLE CONVERTERS in 4991 HEMPSTEAD STATION DR., KETTERING, OH 45429 (NAICS 811111). OSHA activity number 313856635.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONSOLIDATED VEHICLE CONVERTERS
- Site address
- 4991 HEMPSTEAD STATION DR.
- City
- KETTERING
- State
- OH
- ZIP
- 45429
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- SIC code (legacy)
- 7538
- Employees
- 75
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 7, 2009
- Abate by
- Dec 24, 2009
- Penalty
- Initial $2,500 · Current $600 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a fall hazard while using a platform on the forks of a forklift: A maintenance employee operating a forklift with an employee inside the elevated safety platform on the forks was exposed to a fall hazard due to the lack of adequate standard guard rail system (height of chains 28 3/4 inches and 32 1/2 inches respectively without a mid rail on two sides of the platform) no protection against moving parts of the truck, and an effective means to properly secure the platform to the forklift. Among other methods, one feasible and acceptable method to correct this hazard is to follow the guidelines in the American National Standard Institute ANSI/ITSDF B56.1-2005, Safety Standard for Low Lift and High Lift Trucks, Section 7.37.1. Platforms used for elevating personnel shall have (a) a slip resistant floor surface (b) a minimum floor space of 17.12 inches for each platform occupant (c) protection for personnel in their normal working position from moving parts of the truck that represent a hazard (d) restraining means such as a guard rail whenever the platform can be elevated to a height greater than 48 inches (e) a guardrail shall have a height above the platform floor of not less than 36 inches or more than 42 inches around the upper periphery and include a midrail.
Recent events (2)
- · I (S) $600.00
- · Z (S) $2500.00
1910.178 L01 I
- Issued
- Dec 7, 2009
- Abate by
- Dec 17, 2009
- Penalty
- Initial $1,000 · Current $700 Reduced
Recent events (2)
- · I (S) $700.00
- · Z (S) $1000.00
1910.178 L03
- Issued
- Dec 7, 2009
- Abate by
- Dec 17, 2009
Recent events (2)
- · I (S)
- · Z (S)
1910.212 A01
- Issued
- Dec 7, 2009
- Abate by
- Jan 8, 2010
- Penalty
- Initial $1,000 · Current $700 Reduced
Recent events (2)
- · I (S) $700.00
- · Z (S) $1000.00
1910.242 B
- Issued
- Dec 7, 2009
- Abate by
- Dec 17, 2009
- Penalty
- Initial $1,000
Recent events (2)
- · I (O)
- · Z (S) $1000.00
1910.178 L04 III
- Issued
- Dec 7, 2009
- Abate by
- Dec 24, 2009
Recent events (2)
- · I (O)
- · Z (O)
1910.178 Q07
- Issued
- Dec 7, 2009
- Abate by
- Dec 17, 2009
Recent events (2)
- · I (O)
- · Z (O)
More inspections at Consolidated Vehicle Converters
View Consolidated Vehicle Converters's full OSHA safety record →
More inspections in this industry (NAICS 811111)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 313856635.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.