MT. PROSPECT, IL —
OSHA Inspection: PERFECTION SPRING & STAMPING CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PERFECTION SPRING & STAMPING CORP. in 1449 E. ALGONQUIN ROAD, MT. PROSPECT, IL 60056 (NAICS 332116). OSHA activity number 314013830.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PERFECTION SPRING & STAMPING CORP.
- Site address
- 1449 E. ALGONQUIN ROAD
- City
- MT. PROSPECT
- State
- IL
- ZIP
- 60056
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- SIC code (legacy)
- 3469
- Employees
- 80
- Ownership type
- A
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $875 · Current $435 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an amputation hazard from the rotating/moving blade: a) Tool Room Area - Provision was not made to prevent the Johnson horizontal metal cutting band saw model #J, serial #H17620, from automatically restarting upon restoration of power after a power source failure. Among others methods, one feasible and acceptable means of abatement in an event of interruption in the electrical supply to the saw would be to provide an electrical device that is designed to prevent the saw from restarting automatically when power is restored, such as a magnetic restart or similar device as prescribed by the American National Standard Institute for Metal Sawing Machines, ANSI B11.10-2003, Section 6.11. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $435.00
- — Z (S) $875.00
1910.23 C01
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.36 D01
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.179 G01 V
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.212 A01
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $875 · Current $435 Reduced
Recent events (2)
- — I (S) $435.00
- — Z (S) $875.00
1910.305 J01 II
- Issued
- Mar 5, 2010
- Abate by
- Mar 10, 2010
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.334 A02 I
- Issued
- Mar 5, 2010
- Abate by
- Mar 24, 2010
- Penalty
- Initial $525 · Current $265 Reduced
Recent events (2)
- — I (S) $265.00
- — Z (S) $525.00
1910.22 D01
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
More inspections at Perfection Spring & Stamping Corp.
View Perfection Spring & Stamping Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314013830.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.