GREENWICH, CT —
OSHA Inspection: TELLEZ, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TELLEZ, LLC in 34 TOD LANE, GREENWICH, CT 06831 (NAICS 561730). OSHA activity number 314066697.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TELLEZ, LLC
- Site address
- 34 TOD LANE
- City
- GREENWICH
- State
- CT
- ZIP
- 06831
- Mailing
- 75 MARLIN DRIVE, NORWALK, CT 06854
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561730
- SIC code (legacy)
- 0783
- Employees
- 3
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 19, 2010
- Abate by
- Aug 31, 2010
- Penalty
- Initial $1,500 · Current $1,050 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to serious severe lacerations from improper use of a chainsaw. JOBSITE: An employee, who was engaged in cutting branches and limbs with a chain saw while standing in the tree did not use both hands to safely operate the chain saw at all times. On or about 03/16/2010, the chain saw was displaced during the cutting operation and hit the employee's left wrist. The employee sustained a severe laceration to left wrist from the incident. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: 1. Place thumbs and fingers of both hands encircling the handle of the chain saw for a proper grip. 2. Follow the appropriate standards, such as ANSI Z133.1-2006, 29 CFR 1910.266(e)(2)(viii): the chain saw shall be held with the thumbs and fingers of both hands encircling the handles during operation unless the employer demonstrates that a greater hazard is posed by keeping both hands on the chain saw in that particular situation. 3. Utilize appropriate tools and equipment for the task. 4. Provide training and specific instructions for proper handling of chain saws. 5. Utilize other effective and safe means or methods.
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.132 A
- Issued
- Aug 19, 2010
- Abate by
- Aug 31, 2010
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.132 D01
- Issued
- Aug 19, 2010
- Abate by
- Sep 14, 2010
- Penalty
- Initial $1,050 · Current $720 Reduced
Recent events (2)
- — I (S) $720.00
- — Z (S) $1050.00
1910.132 F01
- Issued
- Aug 19, 2010
- Abate by
- Sep 14, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.133 A01
- Issued
- Aug 19, 2010
- Abate by
- Aug 21, 2010
- Penalty
- Initial $750 · Current $530 Reduced
Recent events (2)
- — I (S) $530.00
- — Z (S) $750.00
1910.135 A01
- Issued
- Aug 19, 2010
- Abate by
- Aug 31, 2010
- Penalty
- Initial $750 · Current $530 Reduced
Recent events (2)
- — I (S) $530.00
- — Z (S) $750.00
1910.1200 E01
- Issued
- Aug 19, 2010
- Abate by
- Sep 14, 2010
- Penalty
- Initial $600 · Current $420 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1910.1200 G08
- Issued
- Aug 19, 2010
- Abate by
- Sep 14, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 H01
- Issued
- Aug 19, 2010
- Abate by
- Sep 14, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.151 B
- Issued
- Aug 19, 2010
- Abate by
- Aug 31, 2010
Recent events (2)
- — I (O)
- — Z (O)
More inspections in this industry (NAICS 561730)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314066697.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.