SALISBURY, NC ·
OSHA Inspection: ALLOYWORKS, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of ALLOYWORKS, LLC in 814 W INNES ST., SALISBURY, NC 28144 (NAICS 331492). OSHA activity number 314186404.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALLOYWORKS, LLC
- Site address
- 814 W INNES ST.
- City
- SALISBURY
- State
- NC
- ZIP
- 28144
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331492
- SIC code (legacy)
- 3341
- Employees
- 14
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
14 citations on file for this inspection.
95012901
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $300 · Current $300
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards: a)production, the rated capacity of the job-made 19-inch ingot clamp used to move titanium ingots from the furnace platform had not been determined. Among other methods, feasible and acceptable abatement methods for correcting this hazard includes, but is not limited to: 1.Purchase a new clamp that is designed and engineered with a load rating appropriate for intended use. 2.Have the current ingot clamp reviewed and certified by a professional engineer to determine the load rating.
1910.147 C04 I
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $300 · Current $300
1910.179 J02 III
- Issued
- Mar 5, 2010
- Abate by
- Mar 24, 2010
- Penalty
- Initial $300 · Current $300
Recent events (2)
- · I (S) $300.00
- · Z (S) $300.00
1910.179 J03
- Issued
- Mar 5, 2010
- Abate by
- Mar 17, 2010
- Penalty
- Initial $300
Recent events (2)
- · I (S)
- · Z (S) $300.00
1910.179 M01
- Issued
- Mar 5, 2010
- Abate by
- Mar 15, 2010
- Penalty
- Initial $300
Recent events (2)
- · I (S)
- · Z (S) $300.00
1910.179 N03 V
- Issued
- Mar 5, 2010
- Abate by
- Mar 17, 2010
- Penalty
- Initial $500 · Current $500
1910.184 E03 I
- Issued
- Mar 5, 2010
- Abate by
- Mar 17, 2010
- Penalty
- Initial $300
Recent events (2)
- · I (S)
- · Z (S) $300.00
1910.212 A01
- Issued
- Mar 5, 2010
- Abate by
- Mar 17, 2010
- Penalty
- Initial $500 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $500.00
1910.212 A04
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $500 · Current $500
1910.134 C01
- Issued
- Mar 5, 2010
- Abate by
- Apr 21, 2010
1910.134 C02 I
- Issued
- Mar 5, 2010
- Abate by
- Mar 17, 2010
1910.134 E01
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
1910.178 Q07
- Issued
- Mar 5, 2010
- Abate by
- Mar 17, 2010
1910.1200 E01
- Issued
- Mar 5, 2010
- Abate by
- Mar 31, 2010
- Penalty
- Initial $150 · Current $150
More inspections at Alloyworks, LLC
View Alloyworks, LLC's full OSHA safety record →
More inspections in this industry (NAICS 331492)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314186404.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.