HOUSTON, TX — 2010-02-18 00:00:00

OSHA Inspection: QUALITY PRODUCT FINISHING

Planned inspection · Safety discipline

At a glance

On 2010-02-18 00:00:00, OSHA opened a planned safety inspection of QUALITY PRODUCT FINISHING in 9610 FAIRBANK N HOUSTON RD, HOUSTON, TX 77064 (NAICS 332812). OSHA activity number 314257767.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quality Product Finishing — free Get an email when a new federal OSHA severe-injury report for Quality Product Finishing is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: QUALITY PRODUCT FINISHING
Site address: 9610 FAIRBANK N HOUSTON RD
City: HOUSTON
State: TX
ZIP: 77064
Mailing: 9610 FAIRBANK N HOUSTON RD, HOUSTON, TX 77064

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Complete (A)
Discipline: Safety
Advance notice: No
Union status: N

When did the case open and close?

Opened: 2010-02-18 00:00:00
Closing conference: 2010-02-19 00:00:00
Case closed: 2012-10-01 00:00:00
Last modified: 2016-06-10 00:00:00
Data loaded: 2016-06-30 01:10:52

Establishment context

NAICS code: 332812
SIC code (legacy): 3479
Employees: 48
Ownership type: A
Industry flags: Manufacturing safety.

Citations

11 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 2 exposed

Issued: Mar 12, 2010
Abate by: Mar 16, 2010
Penalty: Initial $875 · Current $525 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish to each of his employees a place of employment which was free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to the hazard of being struck by falling portions
of the hoisted load or
caught in between hoisted loads in the event of a crane failure from lack
of periodic inspections.
Among other methods, one feasible and acceptable method to correct this
hazard is to
perform "periodic" inspections in accordance with ANSI B30-11-2.1.3-1998.
Disclaimers:
1.  You are not limited to the abatement methods suggested above.
2.  The methods explained are general and may not be effective in all
cases.
3.  The employee is responsible for selecting and carrying out an
appropriate method of
abatement.e

Recent events (2)

2010-03-25 00:00:00 — I (S) $525.00
2010-03-12 00:00:00 — Z (S) $875.00

1910.107 I04

Serious Gravity 03 1 instance 1 exposed

Issued: Mar 12, 2010
Abate by: Mar 16, 2010
Penalty: Initial $875 · Current $525 Reduced

Recent events (2)

2010-03-25 00:00:00 — I (S) $525.00
2010-03-12 00:00:00 — Z (S) $875.00

1910.124 F

Serious Gravity 10 1 instance 2 exposed

Issued: Mar 12, 2010
Abate by: Mar 16, 2010
Penalty: Initial $2,500 · Current $1,500 Reduced

Recent events (2)

2010-03-25 00:00:00 — I (S) $1500.00
2010-03-12 00:00:00 — Z (S) $2500.00

1910.124 G02

Serious Gravity 10 1 instance 2 exposed

Issued: Mar 12, 2010
Abate by: Apr 24, 2010
Penalty: Initial $2,500 · Current $1,500 Reduced

Recent events (2)

2010-03-25 00:00:00 — I (S) $1500.00
2010-03-12 00:00:00 — Z (S) $2500.00

1910.132 A

Serious Gravity 10 1 instance 2 exposed

Issued: Mar 12, 2010
Abate by: Mar 16, 2010
Penalty: Initial $2,500 · Current $1,500 Reduced

Recent events (2)

2010-03-25 00:00:00 — I (S) $1500.00
2010-03-12 00:00:00 — Z (S) $2500.00

1910.134 I05 III

Serious Gravity 03 5 instances 2 exposed

Issued: Mar 12, 2010
Abate by: Mar 16, 2010
Penalty: Initial $875 · Current $525 Reduced

Recent events (2)

2010-03-25 00:00:00 — I (S) $525.00
2010-03-12 00:00:00 — Z (S) $875.00

1910.151 C

Serious Gravity 10 1 instance 4 exposed

Issued: Mar 12, 2010
Abate by: Apr 24, 2010
Penalty: Initial $2,500 · Current $1,500 Reduced

Recent events (2)

2010-03-25 00:00:00 — I (S) $1500.00
2010-03-12 00:00:00 — Z (S) $2500.00

1910.134 I07

Other-than-serious Gravity 01 5 instances 2 exposed

Issued: Mar 12, 2010
Abate by: Mar 16, 2010

Recent events (2)

2010-03-25 00:00:00 — I (O)
2010-03-12 00:00:00 — Z (O)

1910.134 C01

Other-than-serious Gravity 01 1 instance 1 exposed

Issued: Mar 12, 2010
Abate by: Mar 16, 2010

Recent events (2)

2010-03-25 00:00:00 — I (O)
2010-03-12 00:00:00 — Z (O)

1910.134 I01 II

Other-than-serious Gravity 01 6 instances 2 exposed

Issued: Mar 12, 2010
Abate by: Mar 16, 2010

Recent events (2)

2010-03-25 00:00:00 — I (O)
2010-03-12 00:00:00 — Z (O)

1910.134 I05 IV

Other-than-serious Gravity 01 5 instances 2 exposed

Issued: Mar 12, 2010
Abate by: Mar 18, 2010

Recent events (2)

2010-03-25 00:00:00 — I (O)
2010-03-12 00:00:00 — Z (O)

More inspections at Quality Product Finishing

Aug 8, 1994 HOUSTON, TX Mar 3, 1993 HOUSTON, TX

View Quality Product Finishing's full OSHA safety record →

More inspections in this industry (NAICS 332812)

Jul 15, 2026 77575 - AZZ Precoat Metals · COLUMBIA, SC Jul 15, 2026 77574 - Precoat Metals · COLUMBIA, SC Jul 10, 2026 Diversified Services, INC. · WICHITA, KS Jul 9, 2026 Nlmk Sharon Coating, LLC · SHARON, PA Jul 8, 2026 Superior Powder Coating INC · CUDDY, PA

More inspections in TX

Jul 17, 2026 Cornelius Nurseries, INC. · RICHMOND, TX Jul 17, 2026 Holloway Houston, INC. · HOUSTON, TX Jul 17, 2026 Voluntary Purchasing Groups, INC. · BONHAM, TX Jul 16, 2026 Rnwbl · SNYDER, TX Jul 16, 2026 United Rentals, INC. · WICHITA FALLS, TX

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314257767.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.