MIAMI, FL —
OSHA Inspection: SOUTHERN GEAR & MACHINE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SOUTHERN GEAR & MACHINE, INC. in 3685 NW 106TH ST, MIAMI, FL 33147 (NAICS 336413). OSHA activity number 314267147.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTHERN GEAR & MACHINE, INC.
- Site address
- 3685 NW 106TH ST
- City
- MIAMI
- State
- FL
- ZIP
- 33147
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336413
- SIC code (legacy)
- 3728
- Employees
- 77
- Ownership type
- A
Citations
13 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 14, 2011
- Abate by
- Mar 28, 2011
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
Section 5(a)1 of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At Southern Gear & Machine Inc., Miami, FL. a.At the deburring department, employees were exposed to caught by hazards when used a drill press (Cummins, Model C117F) that lacked a provision to prevent restart following power restoration, on or about 11/08/2010. b.At the deburring department, employees were exposed to caught by hazards when used a drill press (Maskiner, No. 112930) that lacked a provision to prevent restart following power restoration, on or about 11/08/2010. c.At the mold lathe department, an employee was exposed to caught by hazards when used a precision honing machine (Sunnen, Model 4H01) which has its pedal not unprotected against unexpected or accidental tripping, on or about 2/9/2011. Among the feasible abatement methods to correct Instances a and b is to provide and install a magnetic switch to prevent automatic restart following power restoration. Among the feasible abatement methods to correct Instance c is to enclose the pedal as appropriate to prevent unexpected or accidental tripping. Note:Certification of abatement must be submitted for this citation item.ion
Recent events (2)
- — I (S) $1785.00
- — Z (S) $2975.00
1910.133 A01
- Issued
- Mar 14, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $1,785 · Current $1,071 Reduced
Recent events (2)
- — I (S) $1071.00
- — Z (S) $1785.00
1910.212 A01
- Issued
- Mar 14, 2011
- Abate by
- Mar 28, 2011
- Penalty
- Initial $2,975 · Current $1,785 Reduced
Recent events (4)
- — I
- — Z $42000.00
- — I (S) $1785.00
1910.212 B
- Issued
- Mar 14, 2011
- Abate by
- Mar 28, 2011
- Penalty
- Initial $1,785 · Current $1,071 Reduced
Recent events (2)
- — I (S) $1071.00
- — Z (S) $1785.00
1910.215 A02
- Issued
- Mar 14, 2011
- Abate by
- Mar 17, 2011
- Penalty
- Initial $2,380 · Current $1,428 Reduced
Recent events (2)
- — I (S) $1428.00
- — Z (S) $2380.00
1910.215 A04
- Issued
- Mar 14, 2011
- Abate by
- Mar 17, 2011
- Penalty
- Initial $2,380 · Current $1,428 Reduced
Recent events (2)
- — 3 (S) $1428.00
- — Z (S) $2380.00
1910.215 B09
- Issued
- Mar 14, 2011
- Abate by
- Mar 17, 2011
Recent events (2)
- — I (S)
- — Z (S)
1910.219 E03 I
- Issued
- Mar 14, 2011
- Abate by
- Mar 31, 2011
- Penalty
- Initial $2,380 · Current $1,428 Reduced
Recent events (2)
- — I (S) $1428.00
- — Z (S) $2380.00
1910.304 G05
- Issued
- Mar 14, 2011
- Abate by
- Mar 28, 2011
- Penalty
- Initial $2,380 · Current $1,428 Reduced
Recent events (2)
- — I (S) $1428.00
- — Z (S) $2380.00
1910.1200 H01
- Issued
- Mar 14, 2011
- Abate by
- Mar 28, 2011
- Penalty
- Initial $1,785 · Current $1,071 Reduced
Recent events (2)
- — I (S) $1071.00
- — Z (S) $1785.00
1910.303 F
- Issued
- Mar 14, 2011
- Abate by
- Mar 21, 2011
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G02 III
- Issued
- Mar 14, 2011
- Abate by
- Mar 18, 2011
Recent events (2)
- — I (O)
- — Z (O)
1910.242 B
- Issued
- Mar 14, 2011
- Abate by
- Mar 22, 2011
- Penalty
- Initial $1,785
Recent events (2)
- — I (O)
- — Z (O) $1785.00
More inspections at Southern Gear & Machine, INC.
View Southern Gear & Machine, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336413)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314267147.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.