PHOENIX, NY — 2010-04-27 00:00:00

OSHA Inspection: MAJESTIC MOLD & TOOL INC.

Planned inspection · Safety discipline

At a glance

On 2010-04-27 00:00:00, OSHA opened a planned safety inspection of MAJESTIC MOLD & TOOL INC. in 177 VOLNEY STREET, PHOENIX, NY 13135 (NAICS 333514). OSHA activity number 314344821.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Majestic Mold & Tool INC. — free Get an email when a new federal OSHA severe-injury report for Majestic Mold & Tool INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: MAJESTIC MOLD & TOOL INC.
Site address: 177 VOLNEY STREET
City: PHOENIX
State: NY
ZIP: 13135

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Complete (A)
Discipline: Safety
Advance notice: No
Union status: N

When did the case open and close?

Opened: 2010-04-27 00:00:00
Closing conference: 2010-04-27 00:00:00
Case closed: 2010-05-28 00:00:00
Last modified: 2010-05-28 00:00:00
Data loaded: 2011-10-14 16:38:47

Establishment context

NAICS code: 333514
SIC code (legacy): 3544
Employees: 15
Ownership type: A

Citations

7 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 2 instances 15 exposed

Issued: May 12, 2010
Abate by: Jun 14, 2010
Penalty: Initial $375 · Current $244 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to THE HAZARD OF BEING STRUCK-BY:
a)Assembly area, on or about 04/27/2010, a Yale 2 ton overhead electric
hoist
had an upper and lower limit safety switch that did not function in
accordance with the manufacturer's manual as well as a broken hook safety
latch and no recorded annual inspection had been conducted.
Among other methods, several feasible and acceptable abatement methods to
correct
this hazard are to:
1.Repair or replace the upper Limit switch, lower limit switch, and the
hook
safety latch and ensure they are adjusted to meet the requirement of the
manufacturer's operation manual, Section: Checking limit switch operation
and ANSI B30.16.-1993, Overhead Hoists, Section 16.2.3.3 Adjustments,
Repairs, and Replacements.
2.Conduct frequent and periodic inspections of the hoists in accordance
with
ANSI B30.16-1993 Overhead Hoists, Section 16-2.1 Inspection.
b)Assembly area, on or about 04/27/2010, the Overhead hoist monorail did
not
have a rated load capacity marked on the rail:
Among other methods, several feasible and acceptable abatement methods to
correct
these hazards are to:
1.Mark the rated load capacity on the rail ANSI B30.11-1980, Section
11-2.1.2
Rated Load Markings-Monorails.
2.Conduct frequent and periodic inspections of hoist monorail systems in
accordance with ANSI B30.11-1973 Monorail Systems and Underhung
Cranes, Section 11-2 Inspection, Testing, and Maintenance.

Recent events (2)

2010-05-20 00:00:00 — I (S) $243.75
2010-05-12 00:00:00 — Z (S) $375.00

1910.37 A

Serious Gravity 03 1 instance 15 exposed

Issued: May 12, 2010
Abate by: May 17, 2010
Penalty: Initial $375 · Current $244 Reduced

Recent events (2)

2010-05-20 00:00:00 — I (S) $243.75
2010-05-12 00:00:00 — Z (S) $375.00

1910.253 B03 III

Serious Gravity 02 1 instance 15 exposed

Issued: May 12, 2010
Abate by: May 17, 2010

Recent events (2)

2010-05-20 00:00:00 — I (S)
2010-05-12 00:00:00 — Z (S)

1910.212 A01

Serious Gravity 10 5 instances 15 exposed

Issued: May 12, 2010
Abate by: Jun 14, 2010
Penalty: Initial $1,500 · Current $975 Reduced

Recent events (2)

2010-05-20 00:00:00 — I (S) $975.00
2010-05-12 00:00:00 — Z (S) $1500.00

1910.215 A02

Serious Gravity 02 2 instances 15 exposed

Issued: May 12, 2010
Abate by: May 25, 2010
Penalty: Initial $300 · Current $195 Reduced

Recent events (2)

2010-05-20 00:00:00 — I (S) $195.00
2010-05-12 00:00:00 — Z (S) $300.00

1910.215 B09

Serious Gravity 02 2 instances 15 exposed

Issued: May 12, 2010
Abate by: May 25, 2010

Recent events (2)

2010-05-20 00:00:00 — I (S)
2010-05-12 00:00:00 — Z (S)

1910.304 G05

Serious Gravity 10 3 instances 15 exposed

Issued: May 12, 2010
Abate by: May 17, 2010
Penalty: Initial $1,500 · Current $975 Reduced

Recent events (2)

2010-05-20 00:00:00 — I (S) $975.00
2010-05-12 00:00:00 — Z (S) $1500.00

More inspections at Majestic Mold & Tool INC.

May 31, 2007 PHOENIX, NY Jun 11, 1985 SOUTH BEND, IN Dec 28, 1982 South Bend, IN

View Majestic Mold & Tool INC.'s full OSHA safety record →

More inspections in this industry (NAICS 333514)

Jul 8, 2026 Dekalb Tool & DIE, INC · TUCKER, GA Jun 26, 2026 Fuqua Tool and DIE, LLC · HENDERSONVILLE, TN Jun 24, 2026 Meta Manufacturing Corporation · BLUE ASH, OH Jun 12, 2026 Sharp Tooling Company · BUFFALO, NY Jun 10, 2026 Universal Tooling Corporation · GERRY, NY

More inspections in NY

Jul 17, 2026 Sullivan County Care Center at Sunset Lake · LIBERTY, NY Jul 17, 2026 Vergara Electrical LLC · NEW YORK, NY Jul 17, 2026 Apple Converting, INC. · ONEONTA, NY Jul 17, 2026 Namicela Home Solutions INC · SYRACUSE, NY Jul 17, 2026 Cranesville Block CO., INC. · SYRACUSE, NY

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314344821.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.