HOPE MILLS, NC — 2010-04-26 00:00:00

OSHA Inspection: TOWN OF HOPE MILLS PUBLIC WORKS

Planned inspection · Safety discipline

At a glance

On 2010-04-26 00:00:00, OSHA opened a planned safety inspection of TOWN OF HOPE MILLS PUBLIC WORKS in 5770 ROCKFISH ROAD, HOPE MILLS, NC 28348 (NAICS 924110). OSHA activity number 314373697.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Town of Hope Mills Public Works — free Get an email when a new federal OSHA severe-injury report for Town of Hope Mills Public Works is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: TOWN OF HOPE MILLS PUBLIC WORKS
Site address: 5770 ROCKFISH ROAD
City: HOPE MILLS
State: NC
ZIP: 28348
Mailing: 5770 ROCK FISH ROAD, HOPE MILLS, NC 28348

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Complete (A)
Discipline: Safety
Advance notice: No
Union status: N

When did the case open and close?

Opened: 2010-04-26 00:00:00
Closing conference: 2010-04-26 00:00:00
Case closed: 2010-10-01 00:00:00
Last modified: 2010-10-28 00:00:00
Data loaded: 2011-10-14 16:38:47

Establishment context

NAICS code: 924110
SIC code (legacy): 9511
Employees: 27
Ownership type: B
Industry flags: Manufacturing safety.

Citations

13 citations on file for this inspection.

95012901

Serious 1 instance 9 exposed

Issued: May 12, 2010
Abate by: May 17, 2010
Penalty: Initial $1,250 · Current $1,000 Reduced

General-duty citation text

North Carolina General Statute 95-129(1) of the Occupational Safety and
Health Act of North Carolina:  The
employer did not furnish each of his employees conditions of employment
and a place of employment free from
recognized hazards that were causing or likely to cause death or serious
physical harm in that employees were
exposed to being caught between a tractor and the earth hazards.
a)Maintenance  yard - The John Deere compact utility tractor model #750
with the roll over
protection system had a dry rotted seat belt that was not affixed to its
anchor point.
Abatement note: One means of abatement would be to purchase and mount a
fresh seat belt equipment
on all equipment with roll over protection devices according to the
manufacturer's requirements.
Reference: John Deere operator's manual #OMRE41745 and #OML39646.  Case
equipment manual#
UP28186

Recent events (2)

2010-07-06 00:00:00 — I (S) $1000.00
2010-05-12 00:00:00 — Z (S) $1250.00

1910.215 A04

Serious 1 instance 2 exposed

Issued: May 12, 2010
Abate by: May 17, 2010
Penalty: Initial $375 · Current $300 Reduced

Recent events (2)

2010-07-06 00:00:00 — I (S) $300.00
2010-05-12 00:00:00 — Z (S) $375.00

1910.215 B09

Serious 1 instance 2 exposed

Issued: May 12, 2010
Abate by: May 17, 2010
Penalty: Initial $375

Recent events (2)

2010-07-06 00:00:00 — I (S)
2010-05-12 00:00:00 — Z (S) $375.00

1910.242 B

Serious 1 instance 2 exposed

Issued: May 12, 2010
Abate by: May 17, 2010
Penalty: Initial $1,250 · Current $1,000 Reduced

Recent events (2)

2010-07-06 00:00:00 — I (S) $1000.00
2010-05-12 00:00:00 — Z (S) $1250.00

1910.243 E04 IIIA

Serious 1 instance 2 exposed

Issued: May 12, 2010
Abate by: May 17, 2010
Penalty: Initial $1,250 · Current $980 Reduced

Recent events (2)

2010-07-06 00:00:00 — I (S) $980.00
2010-05-12 00:00:00 — Z (S) $1250.00

1910.305 B01 I

Serious 1 instance 2 exposed

Issued: May 12, 2010
Abate by: May 17, 2010
Penalty: Initial $100 · Current $100

Recent events (2)

2010-07-06 00:00:00 — I (S) $100.00
2010-05-12 00:00:00 — Z (S) $100.00