ADVANCE, MO ·
OSHA Inspection: DAVID SIMMONS CONSTRUCTION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of DAVID SIMMONS CONSTRUCTION in LOT #17 103 TUPOLO STREET, ADVANCE, MO 63730 (NAICS 238130). OSHA activity number 315094730.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAVID SIMMONS CONSTRUCTION
- Site address
- LOT #17 103 TUPOLO STREET
- City
- ADVANCE
- State
- MO
- ZIP
- 63730
- Mailing
- RR 1 BOX 1204, GLENALLEN, MO 63751
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- SIC code (legacy)
- 1751
- Employees
- 3
- Ownership type
- Private (A)
- Industry flags
- Construction safety.
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 14, 2010
- Abate by
- Dec 27, 2010
- Penalty
- Initial $2,700 · Current $2,700
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards of being struck by the unplanned collapse of 36 wooden trusses: a/ At the job site, 36 wooden trusses with a 6:12 slope were kept in place by a single beam running along the length of the peak. Each truss was composed of yellow pine and measured approximately 28 feet wide. No other means of temporary bracing was in place to prevent these trusses from collapsing. One method of abatement to correct this apparent hazard is to install lateral bracing every eight feet along the top chord and diagonal bracing every 20 feet as required by the BCSI-B2, Summary Sheet, Truss Plate Institute. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method. ABATEMENT CERTIFICATION AND ABATEMENT VERIFICATION ARE REQUIRED FOR THIS VIOLATION.
Recent events (2)
- · I (S) $2700.00
- · Z (S) $2700.00
1926.21 B02
- Issued
- Dec 14, 2010
- Abate by
- Feb 2, 2011
- Penalty
- Initial $2,160 · Current $2,160
Recent events (2)
- · I (S) $2160.00
- · Z (S) $2160.00
1926.503 A01
- Issued
- Dec 14, 2010
- Abate by
- Feb 2, 2011
Recent events (2)
- · I (S)
- · Z (S)
1926.100 A
- Issued
- Dec 14, 2010
- Abate by
- Dec 27, 2010
- Penalty
- Initial $2,160 · Current $2,160
Recent events (2)
- · I (S) $2160.00
- · Z (S) $2160.00
1926.102 A01
- Issued
- Dec 14, 2010
- Abate by
- Dec 27, 2010
- Penalty
- Initial $2,160 · Current $2,160
Recent events (2)
- · I (S) $2160.00
- · Z (S) $2160.00
1926.501 B13
- Issued
- Dec 14, 2010
- Abate by
- Dec 27, 2010
- Penalty
- Initial $3,780 · Current $3,780
Recent events (2)
- · I (S) $3780.00
- · Z (S) $3780.00
More inspections in this industry (NAICS 238130)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 315094730.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.