MILWAUKEE, WI —
OSHA Inspection: ACME GALVANIZING, INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of ACME GALVANIZING, INC. in 2730 SOUTH 19TH STREET, MILWAUKEE, WI 53215 (NAICS 332813). OSHA activity number 315121806.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACME GALVANIZING, INC.
- Site address
- 2730 SOUTH 19TH STREET
- City
- MILWAUKEE
- State
- WI
- ZIP
- 53215
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- SIC code (legacy)
- 3471
- Employees
- 70
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
- Penalty
- Initial $5,390 · Current $2,700 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that the rated load was not marked on structural/mechanical lifting devices. (a)Employees were exposed to struck by/crushing hazards while working with and around the Zenar 6 Ton overhead gantry crane and the employer did not ensure that the rate load was marked on the structural lifting device (galvanizing rack). Among other methods, feasible means of abatement by which the hazard may be corrected are as followed: 1.Establish compliance with ANSI/ASME B30.20 - 2010, "American Society of Mechanical Engineers - Below-the-Hook Lifting Devices." 2.Determine the rated load for the galvanizing racks and mark the rated load on the racks. Certification, and documentation/evidence of abatement is required. Certification of abatement is required by 29 CFR Part 1903 and is to be submitted within ten (10) calendar days after the abatement date.ment
Recent events (2)
- — F (S) $2700.00
- — Z (S) $5390.00
1910.132 D01
- Issued
- Dec 6, 2011
- Abate by
- Dec 9, 2011
- Penalty
- Initial $5,390 · Current $5,390
Recent events (2)
- — F (S) $5390.00
- — Z (S) $5390.00
1910.132 D02
- Issued
- Dec 6, 2011
- Abate by
- Dec 9, 2011
Recent events (2)
- — F (S)
- — Z (S)
1910.135 A01
- Issued
- Dec 6, 2011
- Abate by
- Dec 9, 2011
- Penalty
- Initial $5,390 · Current $5,390
Recent events (2)
- — F (S) $5390.00
- — Z (S) $5390.00
1910.22 A01
- Issued
- Dec 6, 2011
- Abate by
- Dec 16, 2011
- Penalty
- Initial $5,390 · Current $2,500 Reduced
Recent events (2)
- — F (S) $2500.00
- — Z (S) $5390.00
1910.179 H01 I
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
- Penalty
- Initial $5,390 · Current $5,390
Recent events (2)
- — F (S) $5390.00
- — Z (S) $5390.00
1910.179 J02
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
- Penalty
- Initial $5,390 · Current $5,390
Recent events (2)
- — F (S) $5390.00
- — Z (S) $5390.00
1910.179 M01
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
- Penalty
- Initial $5,390 · Current $5,390
Recent events (2)
- — F (S) $5390.00
- — Z (S) $5390.00
1910.179 N01
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
- Penalty
- Initial $5,390 · Current $5,390
Recent events (2)
- — F (S) $5390.00
- — Z (S) $5390.00
1910.179 N03 I
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
- Penalty
- Initial $5,390 · Current $5,390
Recent events (2)
- — F (S) $5390.00
- — Z (S) $5390.00
1910.303 B01
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
- Penalty
- Initial $3,850
Recent events (2)
- — F (O)
- — Z (S) $3850.00
1910.132 D02
- Issued
- Dec 6, 2011
- Abate by
- Dec 9, 2011
- Penalty
- Initial $5,000 · Current $5,000
Recent events (2)
- — F (S) $5000.00
- — Z (S) $5000.00
1910.135 A01
- Issued
- Dec 6, 2011
- Abate by
- Dec 9, 2011
Recent events (3)
- — Q $5390.00
- — F (S)
- — Z (S) $5390.00
1910.179 J02
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
- Penalty
- Current $5,000
Recent events (3)
- — Q $5390.00
- — F (S) $5000.00
- — Z (S) $5390.00
1910.179 M01
- Issued
- Dec 6, 2011
- Abate by
- Dec 24, 2011
Recent events (3)
- — Q $5390.00
- — F (S)
- — Z (S) $5390.00
More inspections at Acme Galvanizing, INC.
View Acme Galvanizing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332813)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315121806.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.