Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PHILADELPHIA MANUFACTURING CO. DBA PM CRAFTSMAN

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of PHILADELPHIA MANUFACTURING CO. DBA PM CRAFTSMAN in 3525 CRAFTSMAN BLVD, LAKELAND, FL 33803 (NAICS 332999). OSHA activity number 315133983.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Philadelphia Manufacturing CO. DBA PM Craftsman — free Get an email when a new federal OSHA severe-injury report for Philadelphia Manufacturing CO. DBA PM Craftsman is published. One employer, no account, unsubscribe in one click.
Site address
3525 CRAFTSMAN BLVD
City
LAKELAND
State
FL
ZIP
33803
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
SIC code (legacy)
3499
Employees
10
Ownership type
A

14 citations on file for this inspection.

5(a)(1)

Serious Gravity 05 1 instance 4 exposed
Issued
Feb 7, 2011
Abate by
Feb 25, 2011
Penalty
Initial $2,160 · Current $2,160
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not
furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to the hazard of being struck by fragments of
Polyvinyl Chloride
(PVC) Plastic Pipe in the event that the PVC plastic pipe ruptures.
Location:  3525 Craftsman Blvd. Lakeland, FL  33805
a)  In the facility, PVC plastic piping was used in exposed above ground
locations to
transport compressed air for the spray painting operations, for air
operated
tools/equipment, and for cleaning purposes.  The use of PVC plastic pipe
in exposed
above ground locations is not recommended by the Plastic Pipe Institute,
and such use
is prohibited by ANSI/ASME B31.8-1986, Gas Transmission and Distribution
Piping
Systems Standard.
Among other methods, one feasible and acceptable abatement method to
correct this
hazard is to replace all existing PVC pipes and fittings with cast iron
materials, or
other types of metal piping, which are rated to transport compressed air
safely in
exposed above ground locations.

1910.132 A

Serious Gravity 05 1 instance 3 exposed
Issued
Feb 7, 2011
Abate by
Feb 20, 2011
Penalty
Initial $2,400 · Current $2,400

1910.212 A01

Serious Gravity 05 3 instances 2 exposed
Issued
Feb 7, 2011
Abate by
Feb 10, 2011
Penalty
Initial $2,400 · Current $2,400

1910.215 A01

Serious Gravity 05 1 instance 2 exposed
Issued
Feb 7, 2011
Abate by
Feb 10, 2011
Penalty
Initial $2,400 · Current $2,400

1910.215 A04

Serious Gravity 05 1 instance 2 exposed
Issued
Feb 7, 2011
Abate by
Feb 10, 2011

1910.303 B01

Serious Gravity 01 1 instance 2 exposed
Issued
Feb 7, 2011
Abate by
Feb 10, 2011
Penalty
Initial $1,800 · Current $1,800

1910.304 G05

Serious Gravity 01 1 instance 1 exposed
Issued
Feb 7, 2011
Abate by
Feb 17, 2011

1910.305 A02 I

Serious Gravity 01 2 instances 2 exposed
Issued
Feb 7, 2011
Abate by
Feb 10, 2011

1910.305 G02 III

Serious Gravity 01 2 instances 2 exposed
Issued
Feb 7, 2011
Abate by
Feb 10, 2011

1910.1200 E01 I

Serious Gravity 01 3 instances 10 exposed
Issued
Feb 7, 2011
Abate by
Mar 12, 2011
Penalty
Initial $1,800 · Current $1,800

1910.1200 F05 I

Serious Gravity 01 1 instance 4 exposed
Issued
Feb 7, 2011
Abate by
Feb 17, 2011

1910.1200 F05 II

Serious Gravity 01 1 instance 4 exposed
Issued
Feb 7, 2011
Abate by
Feb 15, 2011

1910.1200 H01

Serious Gravity 01 1 instance 1 exposed
Issued
Feb 7, 2011
Abate by
Feb 17, 2011

1910.178 L01 II

Other-than-serious Gravity 01 1 instance 1 exposed
Issued
Feb 7, 2011
Abate by
Mar 12, 2011

View Philadelphia Manufacturing CO. DBA PM Craftsman's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315133983.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.