LAURINBURG, NC —
OSHA Inspection: MURPHY-BROWN LLC
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of MURPHY-BROWN LLC in 19600 ANDREW JACKSON HWY., LAURINBURG, NC 28352 (NAICS 311119). OSHA activity number 315453035.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MURPHY-BROWN LLC
- Site address
- 19600 ANDREW JACKSON HWY.
- City
- LAURINBURG
- State
- NC
- ZIP
- 28352
- Mailing
- 2822 HIGHWAY 24 WEST, WARSAW, NC 28398
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311119
- SIC code (legacy)
- 0213
- Employees
- 22
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
9 citations on file for this inspection.
95012901
- Issued
- Feb 1, 2012
- Abate by
- Feb 6, 2012
- Penalty
- Initial $6,300 · Current $6,300
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crush by hazards: a)Mixer area of feed mill - The "Autoquip" pallet lift, model #FLM-4, had a gate which was positioned and secured in the open position at the first level to prevent employees from entering the pallet lift shaft while the lift is servicing the second level. b)Mixer area of feed mill - The safety interlock switches on the "Autoquip" pallet lift, model #FLM-4 had been by-passed which allowed the lift to be used while the gates were in the open position. c)Mixer area of feed mill - The "Autoquip" pallet lift, model #FLM-4 was operated by an employee who was not trained to inspect the lift prior to use to ensure it was in safe operating condition. One feasible method of abatement is to fix the gate as it was factory installed with the safety interlock working to ensure the lift will not operate until the gate is in the closed position, and to train operators to perform a visual inspection to ensure the lift is in a safe operational condition.
Recent events (2)
- — I (S) $6300.00
- — Z (S) $6300.00
1910.146 D05 I
- Issued
- Feb 1, 2012
- Abate by
- Feb 6, 2012
- Penalty
- Initial $4,000 · Current $4,000
Recent events (2)
- — I (S) $4000.00
- — Z (S) $4000.00
1910.146 D06
- Issued
- Feb 1, 2012
- Abate by
- Feb 6, 2012
- Penalty
- Initial $4,000
Recent events (2)
- — I (S)
- — Z (S) $4000.00
1910.146 E01
- Issued
- Feb 1, 2012
- Abate by
- Feb 6, 2012
- Penalty
- Initial $4,000
Recent events (2)
- — I (S)
- — Z (S) $4000.00
1910.147 C07 I
- Issued
- Feb 1, 2012
- Abate by
- Feb 27, 2012
- Penalty
- Initial $6,300 · Current $6,300
Recent events (2)
- — I (S) $6300.00
- — Z (S) $6300.00
1910.303 F01
- Issued
- Feb 1, 2012
- Abate by
- Feb 6, 2012
- Penalty
- Initial $4,000 · Current $4,000
Recent events (2)
- — I (S) $4000.00
- — Z (S) $4000.00
1910.303 F04
- Issued
- Feb 1, 2012
- Abate by
- Feb 6, 2012
- Penalty
- Initial $4,000
Recent events (2)
- — I (O)
- — Z (S) $4000.00
1910.147 C05 IID
- Issued
- Feb 1, 2012
- Abate by
- Feb 6, 2012
- Penalty
- Initial $1,200 · Current $1,200
Recent events (2)
- — I (O) $1200.00
- — Z (O) $1200.00
1910.305 G02 III
- Issued
- Feb 1, 2012
- Abate by
- Feb 6, 2012
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Murphy-Brown LLC
View Murphy-Brown LLC's full OSHA safety record →
More inspections in this industry (NAICS 311119)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315453035.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.