HUBBARDSTON, MA · 2011-07-05 00:00:00

OSHA Inspection: WIDE ANGLE MARKETING, INC.

Complaint inspection · Safety discipline

At a glance

On 2011-07-05 00:00:00, OSHA opened a complaint safety inspection of WIDE ANGLE MARKETING, INC. in 27D OLD COLONY RD, HUBBARDSTON, MA 01452 (NAICS 321999). OSHA activity number 315513978.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Wide Angle Marketing, INC. for free Get an email when a new federal OSHA severe-injury report for Wide Angle Marketing, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: WIDE ANGLE MARKETING, INC.
Site address: 27D OLD COLONY RD
City: HUBBARDSTON
State: MA
ZIP: 01452

What kind of inspection was it?

Inspection type: Complaint (B)
Scope: Partial (B)
Discipline: Safety
Advance notice: No
Union status: N

When did the case open and close?

Opened: 2011-07-05 00:00:00
Closing conference: 2011-07-05 00:00:00
Case closed: 2013-04-05 00:00:00
Last modified: 2016-06-10 00:00:00
Data loaded: 2016-06-30 01:10:52

Establishment context

NAICS code: 321999
SIC code (legacy): 2499
Employees: 8
Ownership type: A

Citations

6 citations on file for this inspection.

5(a)(1)

Deleted Serious Gravity 05 1 instance 2 exposed

Issued: Jul 19, 2011
Abate by: Jul 29, 2011
Penalty: Initial $2,550

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized
hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to a possible entrapment of the head and torso between the
forklift and the floor
or other surface while operating the forklift should a tip-over of the
forklift occur.  One feasible
and acceptable abatement method to correct this hazard is to provide an
operator protection
(restraint) device on the forklift such as seat belts:
(a) ESTABLISHMENT --  EMPLOYEE(S) WERE OPERATING A CLARK, MODEL #C500Y
55, SERIAL #Y355-360-2550, PROPANE POWERED FORKLIFT TRUCK, WITHOUT THE
USE OF A RESTRAINT DEVICE, SUCH AS A SEAT BELT, EXPOSING EMPLOYEE(S)
TO POTENTIAL INJURY IN THE EVENT OF A TIP-OVER OF SAID FORKLIFT TRUCK
DURING OPERATION.

Recent events (2)

2011-08-08 00:00:00 · I (S)
2011-07-19 00:00:00 · Z (S) $2550.00

1910.178 L

Deleted Serious Gravity 05 2 instances 2 exposed

Issued: Jul 19, 2011
Abate by: Aug 21, 2011
Penalty: Initial $2,550

Recent events (2)

2011-08-08 00:00:00 · I (S)
2011-07-19 00:00:00 · Z (S) $2550.00

1910.178 P01

Deleted Serious Gravity 05 1 instance 2 exposed

Issued: Jul 19, 2011
Abate by: Jul 29, 2011
Penalty: Initial $2,550

Recent events (2)

2011-08-08 00:00:00 · I (S)
2011-07-19 00:00:00 · Z (S) $2550.00

5(a)(1)

Serious Gravity 05 1 instance 2 exposed

Issued: Jul 19, 2011
Abate by: Jul 29, 2011
Penalty: Initial $2,550 · Current $1,785 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to a possible entrapment of the head and torso between the
forklift and the floor
or other surface while operating the forklift should a tip-over of the
forklift occur.  One feasible
and acceptable abatement method to correct this hazard is to provide an
operator protection
(restraint) device on the forklift such as seat belts:
(a) ESTABLISHMENT --  EMPLOYEE(S) WERE OPERATING A CLARK, MODEL #C500Y
55, SERIAL #Y355-360-2550, PROPANE POWERED FORKLIFT TRUCK, WITHOUT THE
USE OF A RESTRAINT DEVICE, SUCH AS A SEAT BELT, EXPOSING EMPLOYEE(S)
TO POTENTIAL INJURY IN THE EVENT OF A TIP-OVER OF SAID FORKLIFT TRUCK
DURING OPERATION.

Recent events (2)

2011-08-08 00:00:00 · I (S) $1785.00
2011-07-19 00:00:00 · Z (S) $2550.00

1910.178 L

Serious Gravity 05 2 instances 2 exposed

Issued: Jul 19, 2011
Abate by: Aug 21, 2011

Recent events (2)

2011-08-08 00:00:00 · I (S)
2011-07-19 00:00:00 · Z (S)

1910.178 P01

Serious Gravity 05 1 instance 2 exposed

Issued: Jul 19, 2011
Abate by: Jul 29, 2011

Recent events (2)

2011-08-08 00:00:00 · I (S)
2011-07-19 00:00:00 · Z (S)

More inspections at Wide Angle Marketing, INC.

Jan 21, 2020 HUBBARDSTON, MA

View Wide Angle Marketing, INC.'s full OSHA safety record →

More inspections in this industry (NAICS 321999)

Jul 24, 2026 Walzcraft Industries, INC. · LA CROSSE, WI Jul 14, 2026 161549 - American Wood Fibers, INC. · LAURINBURG, NC Jul 14, 2026 Truss Manufacturing INC · NEWINGTON, CT Jul 7, 2026 161501 - Miller BEE Supply, INC. · NORTH WILKESBORO, NC Jun 26, 2026 Florida Lumber Company · MIAMI, FL

More inspections in MA

Jul 30, 2026 The Shed Craft BAR & Kitchen · FRANKLIN, MA Jul 30, 2026 Saint-Gobain Performance Plastics Corporation · TAUNTON, MA Jul 30, 2026 BJ'S Wholesale Club · SOUTH WALTHAM, MA Jul 30, 2026 Legacy Machine & Manufacturing, LLC · AMESBURY, MA Jul 30, 2026 Fountain Plating Company, LLC. · WEST SPRINGFIELD, MA

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315513978.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.