READFIELD, ME —
OSHA Inspection: SAUNDERS MFG. CO. INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SAUNDERS MFG. CO. INC. in 65 NICKERSON HILL ROAD, READFIELD, ME 04355 (NAICS 332999). OSHA activity number 315523084.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAUNDERS MFG. CO. INC.
- Site address
- 65 NICKERSON HILL ROAD
- City
- READFIELD
- State
- ME
- ZIP
- 04355
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- SIC code (legacy)
- 3499
- Employees
- 49
- Ownership type
- A
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- May 10, 2011
- Abate by
- May 20, 2011
- Penalty
- Initial $5,000 · Current $3,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to amputation hazards: In the following instances foot controls were not protected to inhibit accidental actuation by falling or moving objects, or by someone stepping on them: a)Production Room A - 1000/3805 Di-acro Press Brake b)Production Room B - Niagara Press Brake, model B-15-3-4, Serial #43290 One method of feasible abatement is to install a guard over each foot control. The remaining press brakes at the establishment have guards over similar types of foot controls. ANSI B11.3, American National Standard for the Construction, Care, and Use of Power Press Brakes is an applicable industry standard that specifies that foot controls be protected.
Recent events (2)
- — I (S) $3500.00
- — Z (S) $5000.00
1910.147 C01
- Issued
- May 10, 2011
- Abate by
- May 14, 2011
- Penalty
- Initial $5,000 · Current $3,500 Reduced
Recent events (2)
- — I (S) $3500.00
- — Z (S) $5000.00
1910.147 C06 I
- Issued
- May 10, 2011
- Abate by
- May 20, 2011
- Penalty
- Initial $5,000 · Current $3,500 Reduced
Recent events (2)
- — I (S) $3500.00
- — Z (S) $5000.00
1910.147 C05 II
- Issued
- May 10, 2011
- Abate by
- May 14, 2011
Recent events (2)
- — I (S)
- — Z (S)
1910.178 L01 I
- Issued
- May 10, 2011
- Abate by
- May 27, 2011
- Penalty
- Initial $3,000 · Current $2,100 Reduced
Recent events (2)
- — I (S) $2100.00
- — Z (S) $3000.00
1910.212 A01
- Issued
- May 10, 2011
- Abate by
- May 20, 2011
- Penalty
- Initial $5,000 · Current $3,500 Reduced
Recent events (2)
- — I (S) $3500.00
- — Z (S) $5000.00
1910.212 A03 II
- Issued
- May 10, 2011
- Abate by
- Jul 24, 2011
- Penalty
- Initial $7,000 · Current $4,900 Reduced
Recent events (2)
- — I (S) $4900.00
- — Z (S) $7000.00
1910.213 D01
- Issued
- May 10, 2011
- Abate by
- May 27, 2011
- Penalty
- Initial $5,000 · Current $3,500 Reduced
Recent events (2)
- — I (S) $3500.00
- — Z (S) $5000.00
1910.213 B03
- Issued
- May 10, 2011
- Abate by
- May 20, 2011
Recent events (2)
- — I (S)
- — Z (S)
1910.217 B13
- Issued
- May 10, 2011
- Abate by
- Jul 24, 2011
- Penalty
- Initial $5,000 · Current $3,500 Reduced
Recent events (2)
- — I (S) $3500.00
- — Z (S) $5000.00
1910.217 C01 I
- Issued
- May 10, 2011
- Abate by
- May 14, 2011
- Penalty
- Initial $7,000 · Current $4,900 Reduced
Recent events (2)
- — I (S) $4900.00
- — Z (S) $7000.00
1910.217 C02 IB
- Issued
- May 10, 2011
- Abate by
- May 20, 2011
Recent events (2)
- — I (S)
- — Z (S)
1910.217 E01 I
- Issued
- May 10, 2011
- Abate by
- May 27, 2011
- Penalty
- Initial $7,000 · Current $4,900 Reduced
Recent events (2)
- — I (S) $4900.00
- — Z (S) $7000.00
1910.217 E01 II
- Issued
- May 10, 2011
- Abate by
- May 27, 2011
Recent events (2)
- — I (S)
- — Z (S)
1910.219 D01
- Issued
- May 10, 2011
- Abate by
- May 20, 2011
- Penalty
- Initial $4,000 · Current $2,800 Reduced
Recent events (2)
- — I (S) $2800.00
- — Z (S) $4000.00
1910.335 A01 I
- Issued
- May 10, 2011
- Abate by
- Jul 24, 2011
- Penalty
- Initial $5,000 · Current $3,500 Reduced
Recent events (2)
- — I (S) $3500.00
- — Z (S) $5000.00
1910.332 B01
- Issued
- May 10, 2011
- Abate by
- Jul 24, 2011
Recent events (2)
- — I (S)
- — Z (S)
1910.333 B02 I
- Issued
- May 10, 2011
- Abate by
- Jul 24, 2011
Recent events (2)
- — I (S)
- — Z (S)
More inspections at Saunders MFG. CO. INC.
View Saunders MFG. CO. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315523084.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.