ETHER, NC ·
OSHA Inspection: L'GAEL MANUFACTURING L.L.C.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of L'GAEL MANUFACTURING L.L.C. in 205 FRAME SHOP ROAD, ETHER, NC 27247 (NAICS 321920). OSHA activity number 315638445.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- L'GAEL MANUFACTURING L.L.C.
- Site address
- 205 FRAME SHOP ROAD
- City
- ETHER
- State
- NC
- ZIP
- 27247
- Mailing
- P.O. BOX 127, ETHER, NC 27247
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- SIC code (legacy)
- 2499
- Employees
- 49
- Ownership type
- Private (A)
- Industry flags
- Manufacturing health.
Citations
20 citations on file for this inspection.
95012901
- Issued
- Sep 2, 2011
- Abate by
- Sep 7, 2011
- Penalty
- Initial $1,000 · Current $650 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employee(s) were exposed to stuck-by hazards: a)facility - the Caterpillar V150 forklift truck, serial #92W03137, used on uneven muddy terrain to raise the saw dust trailer for cribbing, was not equipped with a functioning seat belt. A feasible and acceptable method of abatement is to follow the forklift truck manufacturer's recommendation that states, "Seat belts must be worn when seated in the seat".
Recent events (2)
- · I (S) $650.00
- · Z (S) $1000.00
1910.95 B01
- Issued
- Sep 2, 2011
- Abate by
- Oct 19, 2011
- Penalty
- Initial $2,100 · Current $1,350 Reduced
Recent events (2)
- · I (S) $1350.00
- · Z (S) $2100.00
1910.95 D01
- Issued
- Sep 2, 2011
- Abate by
- Oct 19, 2011
1910.95 G08 I
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
1910.95 G08 IIB
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
1910.95 K01
- Issued
- Sep 2, 2011
- Abate by
- Sep 14, 2011
1910.141 D02 II
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $600 · Current $400 Reduced
Recent events (2)
- · I (S) $400.00
- · Z (S) $600.00
1910.147 C04 II
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- · I (S) $650.00
- · Z (S) $1000.00
1910.147 E03
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
1910.147 C05 IID
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
1910.147 C06 I
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $2,100 · Current $1,350 Reduced
Recent events (2)
- · I (S) $1350.00
- · Z (S) $2100.00
1910.178 Q07
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $600 · Current $400 Reduced
Recent events (2)
- · I (S) $400.00
- · Z (S) $600.00
1910.212 A05
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- · I (S) $650.00
- · Z (S) $1000.00
1910.303 B01
- Issued
- Sep 2, 2011
- Abate by
- Sep 7, 2011
- Penalty
- Initial $1,000 · Current $650 Reduced
Recent events (2)
- · I (S) $650.00
- · Z (S) $1000.00
1910.22 D01
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
1910.305 A02 X
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
1910.305 B01 I
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
1910.1200 E01
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $300 · Current $300
1910.1200 F05 I
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
1910.1200 F05 II
- Issued
- Sep 2, 2011
- Abate by
- Sep 12, 2011
More inspections at L'Gael Manufacturing L.L.C.
View L'Gael Manufacturing L.L.C.'s full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 315638445.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.