HENDERSONVILLE, NC —
OSHA Inspection: HUNTER CORPORATION DBA HUNTER SUBARU HYUNDAI
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of HUNTER CORPORATION DBA HUNTER SUBARU HYUNDAI in 2520 ASHEVILLE HWY., HENDERSONVILLE, NC 28791 (NAICS 441110). OSHA activity number 315658500.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HUNTER CORPORATION DBA HUNTER SUBARU HYUNDAI
- Site address
- 2520 ASHEVILLE HWY.
- City
- HENDERSONVILLE
- State
- NC
- ZIP
- 28791
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441110
- SIC code (legacy)
- 5511
- Employees
- 70
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
24 citations on file for this inspection.
95012901
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to being struck by forklift rollover protection: a)Shipping/ Receiving Area in the Parts Department - The Clark forklift used for material handling purposes was equipped with rollover protection, but was not equipped with a seatbelt. REFERENCE: ASME B56.1 - 1993, Part II, Paragraph 5.3.19, Operating Safety Rules and Practices, Traveling. An active operator protection device or system, when provided, shall be used. Operator protection in the event of tipover is intended to reduce the risk of entrapment of the head and torso between the truck and the ground but may not protect the operator against all possible injury (see paragraph 7.2.2). REFERENCE: OSHA Standard Interpretation: Enforcement of the Use of Seat Belts on Powered Industrial Trucks in General Industry, 10/09/1996. NOTE: Among other methods of abatement, one feasible and acceptable method to correct this hazard is to retrofit the forklift with a seatbelt, then require all employees to wear the seatbelt during forklift operations.
Recent events (2)
- — I (S) $1500.00
- — Z (S) $2000.00
1910.178 L01 I
- Issued
- Sep 2, 2011
- Abate by
- Oct 21, 2011
1910.178 L06
- Issued
- Sep 2, 2011
- Abate by
- Oct 21, 2011
1910.178 P01
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.178 Q07
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.106 E06 I
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
- Penalty
- Initial $600 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $600.00
1910.107 G05
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.151 C
- Issued
- Sep 2, 2011
- Abate by
- Oct 21, 2011
- Penalty
- Initial $1,200 · Current $900 Reduced
Recent events (2)
- — I (S) $900.00
- — Z (S) $1200.00
1910.106 E02 IVA
- Issued
- Sep 2, 2011
- Abate by
- Sep 7, 2011
1910.106 E09 III
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.107 B09
- Issued
- Sep 2, 2011
- Abate by
- Sep 7, 2011
1910.107 G02
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.107 G03
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.110 F02 II
- Issued
- Sep 2, 2011
- Abate by
- Sep 7, 2011
1910.132 D02
- Issued
- Sep 2, 2011
- Abate by
- Oct 21, 2011
1910.134 C01
- Issued
- Sep 2, 2011
- Abate by
- Oct 21, 2011
1910.134 C02 I
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.134 E01
- Issued
- Sep 2, 2011
- Abate by
- Oct 21, 2011
1910.134 F02
- Issued
- Sep 2, 2011
- Abate by
- Oct 21, 2011
1910.253 B02 II
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.253 B02 IV
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.253 B05 I
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
1910.1200 E01
- Issued
- Sep 2, 2011
- Abate by
- Oct 21, 2011
1910.1200 F05
- Issued
- Sep 2, 2011
- Abate by
- Sep 29, 2011
More inspections at Hunter Corporation DBA Hunter Subaru Hyundai
View Hunter Corporation DBA Hunter Subaru Hyundai's full OSHA safety record →
More inspections in this industry (NAICS 441110)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315658500.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.