BARNEGAT, NJ ·
OSHA Inspection: SP SHEET METAL COMPANY
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SP SHEET METAL COMPANY in 446 N. MAIN STREET, BARNEGAT, NJ 08005 (NAICS 332439). OSHA activity number 315717173.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SP SHEET METAL COMPANY
- Site address
- 446 N. MAIN STREET
- City
- BARNEGAT
- State
- NJ
- ZIP
- 08005
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332439
- SIC code (legacy)
- 3412
- Employees
- 11
- Ownership type
- A
Citations
20 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an amputation hazard: a) Production area, front room - A minimum safe distance program was not implemented for when the hands of the operators of a Pacific Hydraulic Presses and Shears hydraulic press brake (model J135-12, serial number 6681) came within four inches of the point of operation. On or about 7/21/11. A feasible means of abatement would be to establish and implement a minimum safe distance program that conforms to the requirements of ANSI B11.3-1982 paragraph 6.1.4.3 and contains the training elements listed in OSHA Directive CPL 2-1.25. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.22 A02
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $1,800 · Current $1,800
Recent events (2)
- · I (S) $1800.00
- · Z (S) $1800.00
1910.110 F02 I
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.147 C01
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $2,400 · Current $2,400
Recent events (2)
- · I (S) $2400.00
- · Z (S) $2400.00
1910.215 A04
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $2,400 · Current $2,400
Recent events (2)
- · I (S) $2400.00
- · Z (S) $2400.00
1910.215 B09
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
Recent events (2)
- · I (S)
- · Z (S)
1910.242 B
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $1,800 · Current $1,800
Recent events (2)
- · I (S) $1800.00
- · Z (S) $1800.00
5(a)(1)
- Issued
- Sep 30, 2011
- Abate by
- Nov 11, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an amputation hazard: a) Production area, front room - A minimum safe distance program was not implemented for when the hands of the operators of a Pacific Hydraulic Presses and Shears hydraulic press brake (model J135-12, serial number 6681) came within four inches of the point of operation. On or about 7/21/11. A feasible means of abatement would be to establish and implement a minimum safe distance program that conforms to the requirements of ANSI B11.3-1982 paragraph 6.1.4.3 and contains the training elements listed in OSHA Directive CPL 2-1.25. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.22 A02
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
Recent events (3)
- · Q $1800.00
- · I (S)
- · Z (S) $1800.00
1910.242 B
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
Recent events (3)
- · Q $1800.00
- · I (S)
- · Z (S) $1800.00
1910.147 C01
- Issued
- Sep 30, 2011
- Abate by
- Nov 25, 2011
- Penalty
- Current $1,200
Recent events (3)
- · Q $2400.00
- · I (S) $1200.00
- · Z (S) $2400.00
1910.215 A04
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
Recent events (3)
- · Q $2400.00
- · I (S)
- · Z (S) $2400.00
1910.215 B09
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
Recent events (2)
- · I (S)
- · Z (S)
1904.29 A
- Issued
- Sep 30, 2011
- Abate by
- Nov 11, 2011
Recent events (2)
- · I (O)
- · Z (O)
1910.134 C02 I
- Issued
- Sep 30, 2011
- Abate by
- Nov 11, 2011
Recent events (2)
- · I (O)
- · Z (O)
1910.1200 E01
- Issued
- Sep 30, 2011
- Abate by
- Nov 25, 2011
Recent events (2)
- · I (O)
- · Z (O)
1910.1200 F05 I
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
Recent events (2)
- · I (O)
- · Z (O)
1910.1200 F05 II
- Issued
- Sep 30, 2011
- Abate by
- Nov 11, 2011
Recent events (2)
- · I (O)
- · Z (O)
1910.1200 G08
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
Recent events (2)
- · I (O)
- · Z (O)
1910.1200 H01
- Issued
- Sep 30, 2011
- Abate by
- Oct 27, 2011
Recent events (2)
- · I (O)
- · Z (O)
More inspections in this industry (NAICS 332439)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315717173.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.