THOMSON, GA ·
OSHA Inspection: THOMSON PLASTICS, INC.
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of THOMSON PLASTICS, INC. in 130 QUALITY DRIVE N.W., THOMSON, GA 30824 (NAICS 326199). OSHA activity number 315741868.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THOMSON PLASTICS, INC.
- Site address
- 130 QUALITY DRIVE N.W.
- City
- THOMSON
- State
- GA
- ZIP
- 30824
- Mailing
- P.O. BOX 1258, THOMSON, GA 30824
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- SIC code (legacy)
- 3089
- Employees
- 347
- Ownership type
- Private (A)
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 16, 2012
- Abate by
- Aug 9, 2012
- Penalty
- Initial $4,400 · Current $2,840 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to deficiencies on the Simon Scissors lift: On or about 2/7/12, in the production area, employees were exposed to fall hazards while using the Simon Scissors lift as the employer had not corrected deficiencies and items in need of repair prior to permitting employees to use the lift. Deficiencies included: employees were exposed to fall hazards while using the Simon Scissors lift in that the lower guardrail chains were broken and had not been replaced. One method of abatement would be to follow ANSI/SIA A92.6 - 2006, Section 6.4.3 Repair guidelines and when the aerial platform is damaged or in need or repair, all malfunctions and problems identified shall be corrected before the aerial platform is returned to service. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $2840.00
- · Z (S) $4400.00
1910.24 B
- Issued
- Jul 16, 2012
- Abate by
- Oct 9, 2012
- Penalty
- Initial $6,600 · Current $4,235 Reduced
Recent events (2)
- · I (S) $4235.00
- · Z (S) $6600.00
1910.157 G02
- Issued
- Jul 16, 2012
- Abate by
- Aug 9, 2012
- Penalty
- Initial $4,400 · Current $2,840 Reduced
Recent events (2)
- · I (S) $2840.00
- · Z (S) $4400.00
1910.253 B04 III
- Issued
- Jul 16, 2012
- Abate by
- Jul 19, 2012
- Penalty
- Initial $4,400 · Current $2,840 Reduced
Recent events (2)
- · I (S) $2840.00
- · Z (S) $4400.00
1910.253 B02 II
- Issued
- Jul 16, 2012
- Abate by
- Jul 19, 2012
Recent events (2)
- · I (S)
- · Z (S)
1910.23 C01
- Issued
- Jul 16, 2012
- Abate by
- Aug 9, 2012
- Penalty
- Initial $33,000 · Current $21,285 Reduced
Recent events (2)
- · I (R) $21285.00
- · Z (R) $33000.00
1910.147 C06 I
- Issued
- Jul 16, 2012
- Abate by
- Oct 9, 2012
- Penalty
- Initial $38,500 · Current $24,836 Reduced
Recent events (2)
- · I (R) $24836.00
- · Z (R) $38500.00
1910.147 C07 IA
- Issued
- Jul 16, 2012
- Abate by
- Aug 30, 2012
- Penalty
- Initial $38,500 · Current $24,836 Reduced
Recent events (2)
- · I (R) $24836.00
- · Z (R) $38500.00
1910.303 B01 IV
- Issued
- Jul 16, 2012
- Abate by
- Aug 9, 2012
Recent events (2)
- · I (O)
- · Z (O)
More inspections at Thomson Plastics, INC.
View Thomson Plastics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 315741868.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.