EUTAW, AL ·
OSHA Inspection: EUTAW HARDWOOD DIMENSION CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EUTAW HARDWOOD DIMENSION CO. in 507 PRAIRIE AVE, EUTAW, AL 35462 (NAICS 321912). OSHA activity number 315760421.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EUTAW HARDWOOD DIMENSION CO.
- Site address
- 507 PRAIRIE AVE
- City
- EUTAW
- State
- AL
- ZIP
- 35462
- Mailing
- P.O. BOX 61, EUTAW, AL 35462
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321912
- SIC code (legacy)
- 2421
- Employees
- 25
- Ownership type
- A
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $3,600 · Current $1,620 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazards while operating a hydraulic chain saw on the log deck: a)507 Prairie Avenue, Eutaw, AL 35462; On or about September 7, 2011 and at times prior thereto the employer exposed his employee to struck by hazards in that employees were allowed to operate the log cutting chain saw machine without a guard to protect the operator from being struck when the chain saw blade comes off the chain bar. A feasible and acceptable method to correct this hazard is to install a barrier guard between the operator and the chain saw that would block the chain saw blade from striking the employee when it came off of the chain bar.n
Recent events (2)
- · I (S) $1620.00
- · Z (S) $3600.00
1910.22 A01
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $4,200 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $4200.00
1910.147 C01
- Issued
- Sep 28, 2011
- Abate by
- Oct 26, 2011
- Penalty
- Initial $4,200 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $4200.00
1910.157 G02
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $1,800 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $1800.00
1910.213 C01
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $4,200 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $4200.00
1910.213 C03
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
1910.215 A01
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $2,400 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $2400.00
1910.215 A04
- Issued
- Sep 28, 2011
- Abate by
- Oct 31, 2011
- Penalty
- Initial $2,400 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $2400.00
1910.215 B09
- Issued
- Sep 28, 2011
- Abate by
- Oct 31, 2011
Recent events (2)
- · I (S)
- · Z (S)
1910.219 D01
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $4,200 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $4200.00
1910.219 F03
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $3,000 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $3000.00
1910.243 C01
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $2,400 · Current $1,620 Reduced
Recent events (2)
- · I (S) $1620.00
- · Z (S) $2400.00
1910.305 B01 I
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
1910.305 G01 IIID
- Issued
- Sep 28, 2011
- Abate by
- Oct 12, 2011
More inspections at Eutaw Hardwood Dimension CO.
View Eutaw Hardwood Dimension CO.'s full OSHA safety record →
More inspections in this industry (NAICS 321912)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315760421.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.