CHARLOTTE, NC ·
OSHA Inspection: T.G. STEGALL TRUCKING COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of T.G. STEGALL TRUCKING COMPANY, INC. in 8100 E. INDEPENDENCE BLVD., CHARLOTTE, NC 28227 (NAICS 484121). OSHA activity number 316088913.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- T.G. STEGALL TRUCKING COMPANY, INC.
- Site address
- 8100 E. INDEPENDENCE BLVD.
- City
- CHARLOTTE
- State
- NC
- ZIP
- 28227
- Mailing
- P.O. BOX 98, MATTHEWS, NC 28106
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 484121
- SIC code (legacy)
- 4213
- Employees
- 13
- Ownership type
- Private (A)
- Industry flags
- Construction safety.
Citations
19 citations on file for this inspection.
95012901
- Issued
- Nov 22, 2011
- Abate by
- Nov 30, 2011
- Penalty
- Initial $600 · Current $600
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by/caught by hazards: a)within the facility, maintenance shop, a seat belt was not provided on the Nissan Forklift, Model YGF03A40TV, Serial Number YGF03-001741. Among other methods, one feasible method to abate the hazard is to retro-fit the lift with a seatbelt. NOTE: In 1993, Nissan Forklift initiated retro-fit restraint seat procedures.
1910.147 C04 I
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
- Penalty
- Initial $2,100 · Current $1,600 Reduced
Recent events (2)
- · I (S) $1600.00
- · Z (S) $2100.00
1910.147 C06 I
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.147 C07 I
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.177 D03 IIIA
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
- Penalty
- Initial $600 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $600.00
1910.177 D03 IIIB
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.177 D04 II
- Issued
- Nov 22, 2011
- Abate by
- Dec 10, 2011
- Penalty
- Initial $600
Recent events (2)
- · I (S)
- · Z (S) $600.00
1910.254 D09 III
- Issued
- Nov 22, 2011
- Abate by
- Nov 30, 2011
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- · I (S) $500.00
- · Z (S) $1000.00
1910.124 G02
- Issued
- Nov 22, 2011
- Abate by
- Dec 10, 2011
- Penalty
- Initial $300 · Current $300
1910.132 D02
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.157 E02
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.157 G02
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.178 L04 III
- Issued
- Nov 22, 2011
- Abate by
- Nov 25, 2011
1910.178 Q07
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.1200 E01
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
- Penalty
- Initial $300 · Current $300
Recent events (2)
- · I (O) $300.00
- · Z (O) $300.00
1910.1200 G01
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.1200 H01
- Issued
- Nov 22, 2011
- Abate by
- Jan 6, 2012
1910.1200 F05 I
- Issued
- Nov 22, 2011
- Abate by
- Nov 30, 2011
- Penalty
- Initial $300
Recent events (2)
- · I (O)
- · Z (O) $300.00
1910.1200 F05 II
- Issued
- Nov 22, 2011
- Abate by
- Nov 30, 2011
More inspections in this industry (NAICS 484121)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 316088913.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.