Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: MAC PROCESS, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MAC PROCESS, LLC in 13813 FM 529 ROAD, HOUSTON, TX 77041 (NAICS 333922). OSHA activity number 316217900.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MAC Process, LLC for free Get an email when a new federal OSHA severe-injury report for MAC Process, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
MAC PROCESS, LLC
Site address
13813 FM 529 ROAD
City
HOUSTON
State
TX
ZIP
77041
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (N)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333922
SIC code (legacy)
3535
Employees
25
Ownership type
Private (A)
Industry flags
Manufacturing safety.

7 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 23, 2012
Abate by
Feb 29, 2012
Penalty
Initial $7,000 · Current $3,500 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish to each of his employees a place of employment which was free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees
in that
employees were exposed to struck-by hazards:
a. On or about February 01, 2012, the employer failed to ensure that an
anti-repeat
feature was used on a Cincinnati 2510 mechanical sheer used in a single
stroke operation.
When employees used the sheer to cut steel plate using a single stroke the
sheer cycled
repeatedly when the foot control was pressed. This condition exposed
employees to
struck-by hazards.
b. On or about February 01, 2012, the employer failed to ensure that the
foot control on
a Cincinnati 2510 mechanical sheer was protected to prevent unintended
actuation. This
condition exposed employees to struck-by hazards.
Among other methods, one feasible and acceptable means of abatement would
be to
follow the requirements found in the American National Standard Institute
(ANSI) B11.4
2003 edition, Safety Requirements for Shears. Section 6.3.3.1 requires:
"When
mechanical and hydraulic shears are used in single-stroke operations, they
shall
incorporate an anti-repeat feature." Section 6.3.3.3 requires: "Foot
operated controls, if
provided, shall be protected to prevent actuation from falling or moving
objects, or from
unintended actuation by unintended stepping onto the foot control."
Recent events (2)
  • · I (S) $3500.00
  • · Z (S) $7000.00

1910.212 A01

Serious Gravity 05 1 instance 5 exposed
Issued
Feb 23, 2012
Abate by
Feb 27, 2012
Penalty
Initial $5,000 · Current $2,500 Reduced
Recent events (2)
  • · I (S) $2500.00
  • · Z (S) $5000.00

1910.212 A03 II

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 23, 2012
Abate by
Feb 27, 2012
Penalty
Initial $7,000 · Current $3,500 Reduced
Recent events (2)
  • · I (S) $3500.00
  • · Z (S) $7000.00

1910.215 A04

Serious Gravity 05 1 instance 2 exposed
Issued
Feb 23, 2012
Abate by
Feb 27, 2012
Penalty
Initial $5,000 · Current $2,500 Reduced
Recent events (2)
  • · I (S) $2500.00
  • · Z (S) $5000.00

1910.243 C03

Serious Gravity 05 3 instances 5 exposed
Issued
Feb 23, 2012
Abate by
Feb 27, 2012
Penalty
Initial $5,000 · Current $2,500 Reduced
Recent events (2)
  • · I (S) $2500.00
  • · Z (S) $5000.00

1910.334 A02 II

Serious Gravity 05 2 instances 3 exposed
Issued
Feb 23, 2012
Abate by
Feb 27, 2012
Penalty
Initial $5,000 · Current $2,500 Reduced
Recent events (2)
  • · I (S) $2500.00
  • · Z (S) $5000.00

1910.305 G02 III

Other-than-serious Gravity 01 3 instances 7 exposed
Issued
Feb 23, 2012
Abate by
Feb 27, 2012
Recent events (2)
  • · I (O)
  • · Z (O)

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 316217900.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.