CHESTER, MT —
OSHA Inspection: SNYDER'S DENT SHOP, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SNYDER'S DENT SHOP, INC. in HWY 2 & 1ST ST. W, CHESTER, MT 59522 (NAICS 811121). OSHA activity number 330291915.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SNYDER'S DENT SHOP, INC.
- Site address
- HWY 2 & 1ST ST. W
- City
- CHESTER
- State
- MT
- ZIP
- 59522
- Mailing
- PO BOX 281, CHESTER, MT 59522
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.24 H
- Issued
- May 5, 2011
- Abate by
- May 12, 2011
- Penalty
- Initial $1,530 · Current $765 Reduced
General-duty citation text
29 CFR 1910.24(h): Standard railings were not provided on the open sides of all exposed stairways and stair platforms:
Recent events (2)
- — I (S) $765
- — Z (S) $1530
1910.107 B10
- Issued
- May 5, 2011
- Abate by
- May 12, 2011
- Penalty
- Initial $1,530 · Current $765 Reduced
General-duty citation text
29 CFR 1910.107(b)(10): When spraying areas are illuminated through glass panels or other transparent materials, only fixed lighting units shall be used as a source of illumination. Panels did not effectively isolate the spraying area from the area in which the lighting unit was located, and were not so protected that breakage would be unlikely.
Recent events (2)
- — I (S) $765
- — Z (S) $1530
1910.212 A01
- Issued
- May 5, 2011
- Abate by
- May 16, 2011
- Penalty
- Initial $1,530 · Current $765 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.
Recent events (2)
- — I (S) $765
- — Z (S) $1530
1910.215 A04
- Issued
- May 5, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 G02 I
- Issued
- May 5, 2011
- Abate by
- May 12, 2011
- Penalty
- Initial $2,550 · Current $1,275 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i).
Recent events (2)
- — I (S) $1275
- — Z (S) $2550
1910.305 G01 IV A
- Issued
- May 5, 2011
- Abate by
- May 16, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and cables were used as a substitute for the fixed wiring of a structure
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- May 5, 2011
- Abate by
- May 12, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 811121)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330291915.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.