DENVER, CO —
OSHA Inspection: ASPEN GRAPHICS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ASPEN GRAPHICS in 4795 OAKLAND ST., DENVER, CO 80239 (NAICS 323110). OSHA activity number 330292103.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ASPEN GRAPHICS
- Site address
- 4795 OAKLAND ST.
- City
- DENVER
- State
- CO
- ZIP
- 80239
- Mailing
- 4795 OAKLAND ST., DENVER, CO 80239
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323110
- Employees
- 15
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 L01 I
- Issued
- Aug 2, 2011
- Abate by
- Nov 16, 2011
- Penalty
- Initial $1,836 · Current $918 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck(s) safely, as demonstrated by the successful completion of the training and evaluation specified in paragraph (l). a)Aspen Graphics, Inc., 4795 Oakland Street, Denver, CO: The employer did not ensure the operator of the company owned Nissan electric forklift completed the training and evaluation outlined in paragraph L. Abatement Note: Abatement Note: Abatement certification is required for this item (See enclosed Abatement-Certification Letter"). Abatement Note: Per paragraph 1910.178(L)(6) the employer must certify that each operator has been trained and evaluated as required by paragraph (L). The certification must include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.
Recent events (4)
- — F (S) $918
- — F (S) $918
- — C (S) $1836
1910.305 G02 III
- Issued
- Aug 2, 2011
- Abate by
- Nov 16, 2011
- Penalty
- Initial $1,377 · Current $688 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a)Aspen Graphics, Inc., 4795 Oakland Street, Denver, CO:Aspen Graphics, Inc., 4795 Oakland Street, Denver, CO: The employer did not ensure the electrical plug on the Coater Pump was equipped with an appropriate strain relief to prevent pulling on the terminal screws. On or about March 30, 2011, the outer insulation jacket was notably pulled away from the strain relief device. Condition exposed employees to 120 volt shock hazard.
Recent events (3)
- — F (S) $688
- — C (S) $1377
- — Z (S) $1377
1910.212 A01
- Issued
- Aug 2, 2011
- Abate by
- Nov 16, 2011
- Penalty
- Initial $1,836 · Current $918 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by roating parts: a)Aspen Graphics, Inc., 4795 Oakland Street, Denver, CO:The employer did not ensure the out feed area on the Lithrone 26 multi-color printer was adequately guarded to prevent employees from rotating components. On or about March 30, 2011, employees removing completed product from the Lithrone machine were exposed to "struck by" hazards associated with the rotating Gripper Bar mechanism. Abatement Note: Abatement certification is required for this item (See enclosed Abatement-Certification Letter).
Recent events (3)
- — F (S) $918
- — C (S) $1836
- — Z (S) $1836
1910.147 C04 I
- Issued
- Aug 2, 2011
- Abate by
- Nov 16, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed and documented for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a)Aspen Graphics, Inc., 4795 Oakland Street, Denver, CO: 1910.147(C)(4)(i): The employer had not developed and documented specific energy control procedures for the Lithrone 26 multi color printer containing multiple sources of energy. Abatement Note: Abatement certification is required for this item (See enclosed Abatement-Certification Letter).
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Aspen Graphics
View Aspen Graphics's full OSHA safety record →
More inspections in this industry (NAICS 323110)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330292103.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.