Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: G2K CORP DBA GBC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of G2K CORP DBA GBC in 190 S UNION BLVD, LITTLETON, CO 80228 (NAICS 332710). OSHA activity number 330295353.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch G2K Corp DBA GBC — free Get an email when a new federal OSHA severe-injury report for G2K Corp DBA GBC is published. One employer, no account, unsubscribe in one click.
Establishment
G2K CORP DBA GBC
Site address
190 S UNION BLVD
City
LITTLETON
State
CO
ZIP
80228
Mailing
190 S UNION BLVD, LITTLETON, CO 80228
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
49
Ownership type
A

5 citations on file for this inspection.

1910.95 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 21, 2011
Penalty
Initial $2,975 · Current $1,500 Reduced
29 CFR 1910.95(d)(1):  A representative monitoring program was not developed and implemented when information  indicated that an employee's exposure may equal or exceed an 8 hour time weighted average of 85 DBA:    1) On May 24, 2011, an employee engaged in abrasive blasting was exposed to noise at a level of 98.67 dBA as an 8 hour time weighted average.  The employer had not implimented a noise monitoring program.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2975

1910.95 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 21, 2011
Abate by
Jul 13, 2011
Penalty
Initial $0 · Current $0
29 CFR 1910.95(g)(1):  An audiometric testing program was not established and maintained for all employees  whose noise exposure equaled or exceeded an 8 hour time weighted average of 85 DBA:    1) On May 24, 2011, an employee engaged in abrasive blasting was exposed to noise at a level of 98.67 dBA as an 8 hour time weighted average.  The employer had not implimented an employee hearing test program.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 21, 2011
Abate by
Jul 13, 2011
Penalty
Initial $1,785 · Current $900 Reduced
29 CFR 1910.134(e)(1):  The employer did not provide a medical evaluation to determine the employees' ability to use a respirator before the employees were required to use the respirator in the workplace:     1) On or about May 13, 2011, and at prior times, an employee engaged in abrasive blasting wore a supplied air abrasive blasting hood.  The employer had not provided the employee with a medical evaluation to determine the employee's ability to use a respirator.
Recent events (2)
  • — I (S) $900
  • — Z (S) $1785

1910.1026 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 21, 2011
Abate by
Jul 12, 2011
Penalty
Initial $2,975 · Current $1,600 Reduced
29 CFR 1910.1026(d)(1):  The employer who has a workplace or work operation covered by this section did not determine the 8-hour TWA exposure for each employee exposed to chromium (VI):    1) On May 16, 2011, and at prior times, employees were potentially exposed to chromium (VI) when welding stainless steel and employer had not determined the employees' 8-hour TWA exposure.
Recent events (2)
  • — I (S) $1600
  • — Z (S) $2975

1910.1026 L01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 21, 2011
Abate by
Jul 13, 2011
Penalty
Initial $0 · Current $0
29 CFR 1910.1026(l)(1): The employer did not ensure that all employees who were assigned to workplaces where there was exposure to chromium (VI) were provided with information and training as required by the Hazard Communication standard, 29 CFR 1910.1200:    1) The employer had not trained employees who weld stainless steel on the hazards of Cr(VI) exposure.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View G2K Corp DBA GBC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330295353.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.