HAMPTON, NH —
OSHA Inspection: STEVE MILLER GENERAL CONTRACTING, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of STEVE MILLER GENERAL CONTRACTING, LLC in 352 OCEAN BLVD, HAMPTON, NH 03842 (NAICS 238130). OSHA activity number 330632027.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STEVE MILLER GENERAL CONTRACTING, LLC
- Site address
- 352 OCEAN BLVD
- City
- HAMPTON
- State
- NH
- ZIP
- 03842
- Mailing
- 95 BLACKWATER ROAD, ROCHESTER, NH 03867
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.300 B01
- Issued
- Oct 26, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1926.300(b)(1): When power operated tools are designed to accommodate guards, they were not equipped with such guards when in use. a. Site- Employees were exposed to amputation hazards while operating a Makita LS1211 compound miter saw where the lower retractable blade guard was removed.
Recent events (2)
- — I (S) $1500
- — Z (S) $3000
1926.304 I01
- Issued
- Oct 26, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(i)(1): Each circular hand-fed ripsaw was not guarded by a hood that completely enclosed the portion of the saw above the table and that portion of the saw above the material being cut. a. Site- Employees were exposed to amputation hazards while operating a Makita 2708 table saw without a hood guard over the blade.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.403 B02
- Issued
- Oct 26, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a. Site- Employees were exposed to electrical hazards where permanent wiring was subject to damage as it was used as an extension cord and not in accordance with its listing and labeling requirements.
Recent events (2)
- — I (S) $1500
- — Z (S) $3000
1926.451 G01
- Issued
- Oct 26, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $4,200 · Current $2,100 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level was not protected from falling to that lower level. a. Site- The scaffold platform at the top of the ladder accessing the second floor did not have guardrails and employees were exposed to a fall of approximately 18 feet to the basement.
Recent events (2)
- — I (S) $2100
- — Z (S) $4200
1926.501 B13
- Issued
- Oct 26, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet(1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system: a. Site- Employees were exposed to falls between 9 feet and 30 feet on each building level where window and floor openings were not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B01
- Issued
- Oct 26, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): When portable ladders were used for access to an upper landing surface, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access: a. Site- Employees accessing the third and fourth floor were exposed to a fall hazard where the ladders only extended approximately 18 inches above the landing surface.
Recent events (2)
- — I (S) $1500
- — Z (S) $3000
1926.150 C01 I
- Issued
- Oct 26, 2011
- Abate by
- Oct 27, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.150(c)(1)(i): A fire extinguisher, rated not less than 2A, was not provided for each 3,000 square feet of the protected building area, or major fraction thereof. Travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed 100 feet. a. Site- Fire extinguishing equipment was not available onsite.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Steve Miller General Contracting, LLC
View Steve Miller General Contracting, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330632027.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.