IGNACIO, CO ·
OSHA Inspection: J & J INSPECTION
Programmed Related inspection · Safety discipline
At a glance
On , OSHA opened a programmed Related safety inspection of J & J INSPECTION in IGNACIO 33-7-29 #4, IGNACIO, CO 81137 (NAICS 211111). OSHA activity number 330773680.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J & J INSPECTION
- Site address
- IGNACIO 33-7-29 #4
- City
- IGNACIO
- State
- CO
- ZIP
- 81137
- Mailing
- 17 CR 350, FLORA VISTA, NM 87415
What kind of inspection was it?
- Inspection type
- Programmed Related (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 211111
- Employees
- 45
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 13, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $1,785 · Current $1,400 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970; The employer did not furnish employment and a place of employment which was free from recognized hazards which were likely to cause death or serious physical harm to employees in that, two of the anchors did not have inspection tags on them of when they were tested and the other two were out of date:\\r\\n\\r\\n\r\n\r\na) On or about June 22, 2011, and at times prior, employees were exposed to while working on a workover rig in that, two the anchors did not have inspection tags of when they were inspected and the other two anchor tags were out of date..\\r\\n\\r\\n\r\n\r\nAmong other methods, a feasible and acceptable method to correct this hazard is to inspect all anchors tags in accordance with the American Petroleum Institute (API) Standard RP4G 2004, Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations.\\r\\n\\r\\n\r\n\r\nAbatement Note: Abatement certification and documentation is required for this item (see enclosed \\\"Sample Abatement-Certification Letter\\\").\\r\\n
Recent events (2)
- · I (O) $1400
- · Z (S) $1785
1910.23 C01
- Issued
- Sep 13, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $1,785 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v):\r\n\r\n a) On or about June 22, 2011 and at times prior, employees from were exposed to falls exceeding 4 feet while on the rig floor next to the operators station. Abatement Note: Abatement certification and documentation is required for this item (see enclosed \"Sample Abatement-Certification Letter\").
Recent events (2)
- · I (O) $1400
- · Z (S) $1785
1910.23 D01
- Issued
- Sep 13, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $1,785 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.23(d)(1): Every flight of stairs having four or more risers was not equipped with standard stair railings orstandard handrails as specified in paragraphs (d)(1)(i) through (v) of this section, the width of the stair to be measured clear of all obstructionsexcept handrails:\r\n\r\na) On or about June 22, 2011, and at times prior, employees were exposed to falls exceeding 4 feet while using the stairway (no handrails) to access the rig floor.\r\n\r\nAbatement Note: Abatement certification and documentation is required for this item (see enclosed \"Sample Abatement-Certification Letter\").\r\n\r\n
Recent events (2)
- · I (O) $1400
- · Z (S) $1785
1910.26 A01 III
- Issued
- Sep 13, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $1,785 · Current $0 Reduced
General-duty citation text
29 CFR 1910.26(a)(1)(iii): The spacing of rungs or steps were not on 12-inch centers.\r\n\r\na) On or about June 22, 2011, and at times prior, employees were exposed to injury in that, the fixed metal ladder for the mast was not on 12-inch centers.\r\n\r\nAbatement Note: Abatement certification and documentation is required for this item (see enclosed \"Sample Abatement-Certification Letter\").
Recent events (2)
- · I (O) $0
- · Z (S) $1785
1910.132 A
- Issued
- Sep 13, 2011
- Abate by
- Sep 14, 2011
- Penalty
- Initial $2,380 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.132(a): Personal Protective Equipment (PPE) to protect employees from fire and burn hazards was not provided, used maintained in a sanitary and reliable condition: a) On or about June 22, 2011, and at times prior, employees were exposed to injury in that, employees were not provided with approved Personal Protective Equipment (PPE) such as flame-resistant clothing. Abatement Note: Abatement crtification and documentation is required for this item (see enclosed \"Sample Abatement-Certification Letter\").
Recent events (2)
- · I (O) $1700
- · Z (S) $2380
1910.145 C02 I
- Issued
- Sep 13, 2011
- Abate by
- Sep 14, 2011
- Penalty
- Initial $2,975 · Current $0 Reduced
General-duty citation text
29 CFR 1910.145(c)(2)(i): Caution signs were not used to warn against potential hazards or to caution against unsafepractices: a) On or about June 22, 2011, and at times prior, employees were exposed to injury inthat, signage for well site was not posted at the entrance. Abatement Note: Abatement certification and documentation is required for this item (see enclosed "Sample Abatement-Certification Letter").
Recent events (2)
- · I (S) $0
- · Z (S) $2975
More inspections in this industry (NAICS 211111)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 330773680.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.