MERIDIAN, ID —
OSHA Inspection: KENT MURRAY FRAMING, INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of KENT MURRAY FRAMING, INC in LOT 5 BLOCK 37 PACHINO, MERIDIAN, ID 83646 (NAICS 238130). OSHA activity number 330969023.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KENT MURRAY FRAMING, INC
- Site address
- LOT 5 BLOCK 37 PACHINO
- City
- MERIDIAN
- State
- ID
- ZIP
- 83646
- Mailing
- 1540 WILD MUSTANG, STAR, ID 83669
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.403 B02
- Issued
- Sep 15, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $1,530 · Current $1,530
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a) Jobsite: On July 20, 2011 and times prior thereto a four way metal junction box, wrapped in window flashing, was used to supply power to hand tools and an extension cord. Note) Abatement certification IS required for this item.
Recent events (2)
- — I (S) $1530
- — Z (S) $1530
1926.404 F06
- Issued
- Sep 15, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) Jobsite: On July 20, 2011 and times prior thereto the ground plugs were missing from the cords of three skilsaws in use on the jobsite. Note) Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.405 G02 IV
- Issued
- Sep 15, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) Jobsite: On July 20, 2011 and times prior thereto the power cord on a four way junction box had wires that were exposed and pulled away from the box where window flashing wrap was used for strain relief on the power cord. Note) Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B14
- Issued
- Sep 15, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $1,530 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached), where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 M) above the walking/working surface, is not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system: a) Jobsite: On July 20, 2011 and times prior thereto a guard rail system was not in place on the second floor window opening(s). Note) Abatement certification IS required for htis item.
Recent events (2)
- — I (O) $0
- — Z (S) $1530
1926.502 B02 IV
- Issued
- Sep 15, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(b)(2)(iv): Other structural members were installed such that there were openings in the guardrail system that were more than 19 inches (48 cm) wide: a) Jobsite: On JUly 20, 2011 and times prior thereto, employees were exposed to an approximate 10 foot fall hazard in an area used for access to/from the roof where the wall studs were approximately 22 inches apart without a guardrail system in place. Note) Abatement certification IS required for this item.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Kent Murray Framing, INC
View Kent Murray Framing, INC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330969023.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.