DAYTON, OH —
OSHA Inspection: AMERICAN METAL WORKS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AMERICAN METAL WORKS, INC. in 3726 INPARK DR, DAYTON, OH 45414 (NAICS 332116). OSHA activity number 330969122.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERICAN METAL WORKS, INC.
- Site address
- 3726 INPARK DR
- City
- DAYTON
- State
- OH
- ZIP
- 45414
- Mailing
- 3726 INPARK CIRCLE, DAYTON, OH 45414
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.132 A
- Issued
- Aug 16, 2011
- Abate by
- Sep 7, 2011
- Penalty
- Initial $3,600 · Current $2,520 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact. a) Protective equipment for the legs was not worn during the removal of cut metal material from the shear.
Recent events (2)
- — I (S) $2520
- — Z (S) $3600
1910.147 D03
- Issued
- Aug 16, 2011
- Abate by
- Sep 7, 2011
- Penalty
- Initial $2,400 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): Machine or equipment isolation. All energy isolating devices that are needed to control the energyto the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energysource(s). a) On or about July 21, 2011, the electrical disconnect on the DoAll bandsaw in the metal shop was not actuated to disable power while changing the blade.
Recent events (2)
- — I (S) $1680
- — Z (S) $2400
1910.147 D04 I
- Issued
- Aug 16, 2011
- Abate by
- Sep 7, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. a) On or about July 21, 2011, a lockout device(s) was not attached to the energy isolating point on the DoAll bandsaw in the metal shop during a blade change.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 II
- Issued
- Aug 16, 2011
- Abate by
- Sep 7, 2011
- Penalty
- Initial $1,800 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a) Operators of powered industrial trucks were not trained prior to being allowed to operate a forklift.
Recent events (2)
- — I (S) $1260
- — Z (S) $1800
1910.178 L02 II
- Issued
- Aug 16, 2011
- Abate by
- Sep 7, 2011
- Penalty
- Initial $1,800 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii): Training shall consist of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. a) Forklift training did not consist of the employer evaluating the operators\' performance in the workplace.
Recent events (2)
- — I (S) $1260
- — Z (S) $1800
More inspections at American Metal Works, INC.
View American Metal Works, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330969122.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.