Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CRUZ RENOVATIONS INCORPORATED

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CRUZ RENOVATIONS INCORPORATED in 817 N 6TH AVE., MAYWOOD, IL 60153 (NAICS 238160). OSHA activity number 330970674.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Cruz Renovations Incorporated — free Get an email when a new federal OSHA severe-injury report for Cruz Renovations Incorporated is published. One employer, no account, unsubscribe in one click.
Site address
817 N 6TH AVE.
City
MAYWOOD
State
IL
ZIP
60153
Mailing
1386 PROSPECT AVE., DES PLAINES, IL 60018
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
7
Ownership type
A

3 citations on file for this inspection.

1903.19 D01

Other-than-serious 1 instance 1 exposed
Issued
Nov 14, 2011
Abate by
Dec 28, 2011
Penalty
Initial $660 · Current $660
29 CFR 1903.19(d)(1):     The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.    Cruz Renovations Incorporated failed to submit documents demonstrating that abatement was completed for each of the following cited violations:    Citation Number 		Item Number			Abatement Date  01			02				08/22/2011    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (O) $660

1926.100 A

Repeat Gravity 5 1 exposed
Issued
Aug 19, 2011
Penalty
Initial $5,280 · Current $5,280
29 CFR 1926.100(a):  Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets.    a)  Employees working below other workers performing a roofing tear off were exposed to stuck-by hazards from falling materials.    No abatement certification or documentation is required for this item.      Cruz Renovations Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.100(a) which was contained in OSHA violation number 315238048, citation 1, item 2, issued on April 15, 2011 and became final order on or about May 6, 2011 with respect to a workplace located at 62 Seneca St., Elgin, IL 60123.
Recent events (1)
  • — Z (R) $5280

1926.501 B13

Repeat Gravity 10 7 exposed
Issued
Aug 19, 2011
Abate by
Aug 22, 2011
Penalty
Initial $9,240 · Current $9,240
29 CFR 1926.501(b)(13): \r\n\r\nEach employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest systems, nor  did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502.\r\n\r\na)  Employees working on a roof tearing off roofing materials were exposed to falls of approximately 16.2 feet.\r\n\r\nIn accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.      Cruz Renovations Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13) which was contained in OSHA violation number 315238048, citation 1, item 2, issued on April 15, 2011 and became final order on or about May 6, 2011 with respect to a workplace located at 62 Seneca St., Elgin, IL 60123.
Recent events (1)
  • — Z (R) $9240

View Cruz Renovations Incorporated's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330970674.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.